Sentinel Pro (UPS systeem)
700 - 3000 VA
Sentinel Pro is de nieuwste evolutie van de succesvolle Riello Dialog Plus online UPS. Deze laatste ontwikkeling is ontworpen met oog voor het milieu en is onderdeel van de Riello ECO Line of UPS.Sentinel Pro is een on-line dubbele conversie UPS, dat de hoogste niveaus van betrouwbaarheid en bescherming voor servers en spraak- en data verwerking van IT-systemen aanbiedt.
Voor lange runtime-toepassingen, kan Sentinel Pro (ER-modellen) worden uitgerust met bijpassende accupacks extensie, die ook extra batterij boost opladers bevat.
Op het gebied van communicatie, heeft elke Sentinel Pro een ingebouwde controlepaneel met een lcd-input en output voltages en de status van de batterijlading zien. De omvormer is een totaal nieuw design, volledig microprocessor gestuurd en gebouwd om de hoogste niveaus van de operationele efficiëntie en configuratie-opties te bereiken. SENTINEL PRO UPS hebben ook standaard USB communicatiepoorten, met een ingebouwde uitbreidingsslot voor extra adapters, protocol converters en gerelateerde contact kaarten.
De UPS is zeer efficiënt. SENTINEL PRO is ontworpen om energie te besparen en heeft een power-off drukknop functie om het energieverbruik tot nul te reduceren, mits er geen belasting is aangesloten of uitgeschakeld.
Sentinel Pro modellen zijn voorzien van 700VA, 1000VA, 1500VA, 2200VA en 3000VA.
Sentinel Pro heeft een garantie van 2 jaar.
Kenmerken
- Gefilterd, gestabiliseerd, betrouwbare uitgangsspanning: on-line dubbele conversie technologie (VFI volgens IEC 62040-3) met ingebouwde EMI filters;
- Hoge overbelastingsvermogen tot 150%;
- Programmeerbare automatische herstart wanneer de netvoeding terugkeert;
- Programmeerbare koude start van de accu;
- Power Factor Correction (UPS input power factor dicht bij 1);
- Brede ingangsspanning tolerantie (van 120-280Vac) zonder het gebruik van batterijen;
- Mogelijkheid om autonomie te verlengen voor enkele uren;
- Volledig configureerbaar met UPS Gereedschap configuratiesoftware;
- Hoge mate van betrouwbaarheid batterij (automatisch en handmatig geactiveerd batterij tests);
- Hoog niveau van UPS betrouwbaarheid (totaal microprocessor);
- Lage impact op het lichtnet (sinusvormige absorptie) Input bescherming met zekering die kan worden gereset.
Geavanceerde communicatie
- Gefilterd, gestabiliseerd, betrouwbare uitgangsspanning: on-line dubbele conversie technologie (VFI volgens IEC 62040-3) met ingebouwde EMI filters;
- Geavanceerde communicatie, multiplatform, voor alle besturingssystemen en netwerkomgevingen, Powershield3 toezicht en stilleggen van de software voor Windows 7, 2008, Vista, 2003, XP, Linux, Mac OS X, Sun Solaris en VMware ESX-besturingssystemen en andere Unix besturingssysteem systemen;
- UPS Gereedschap configuratie en personalisatie software standaard meegeleverd;
- RS232 seriële poort en optisch geïsoleerde contacten;
- USB-poort;
- Poort voor communicatie-kaarten;
Gebruikershandleiding
Riello Sentinel Pro noodstroomvoorziening
Brochure
Riello Sentinel Pro brochure
SEP 7000
| Models | SEP 700 |
|---|---|
| INPUT | |
| Rated power | 700 VA |
| Voltage | 220-230-240 Vac |
| Voltage tolerance | 140 Vac < Vin < 276 Vac @50% LOAD / 184 Vac < Vin < 276 Vac @ 100% LOAD |
| Frequency | 50/60 Hz |
| Frequency tolerance | 50 Hz ± 5% / 60 Hz ± 5% |
| Power factor | > 0.99 |
| Current distorsion | ≤7% |
| BY PASS | |
| Voltage tolerance | 180 – 264 |
| Frequency tolerance | Frequency selected (from ±0.Hz to ±5Hz configurable) |
| Number phases | 1 |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 700 VA |
| Active power | 560 W |
| Number phases | 1 |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinewave |
| Frequency | Can be selected: 50 Hz or 60 Hz or self-learning |
| Voltage distortion with distorcing load | < 4% |
| Voltage distortion with linear load | < 2% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 2 minutes |
| 125% = Load < 150% | 5 seconds |
| Load > 150% | 1 second |
| BATTERIES | |
| Type | VRLA AGM lead, maintenance-free |
| Typical recharge time | 2-4 h |
| ENVIRONMENTAL | |
| Altitude max | 6000 m |
| Color | Black |
| Communication | USB / DB9 with RS232 and contacts / Slot for communication interface |
| Safety compliance | EN 62040-1 and directive 2006/95/EL |
| EMC conformance | EN 620040-2 category C2 and directive 2004/108/EL |
| Accessories provided | Power cable, serial cable, USB cable, safety manual, quick start, software on CD-ROM |
| Protection rating | 3 |
| Surge capability | 300 joule |
| Marks | CE, GS/NEMKO |
| Line-Interactive/Smart Active efficiency | 98% |
| Noise | < 40 dBA @ 1 m |
| Operating temperature | 0°C / +40°C |
| Relative humidity | < 95% not condensed |
| DATA | |
| Weight | 10,9 Kg |
| Dimensions (h w d) | 158x422x235 mm |
SEP 1000
| Models | SEP 1000 |
|---|---|
| INPUT | |
| Rated power | 1000 VA |
| Voltage | 220-230-240 Vac |
| Voltage tolerance | 140 Vac < Vin < 276 Vac @50% LOAD / 184 Vac < Vin < 276 Vac @ 100% LOAD |
| Frequency | 50/60 Hz |
| Frequency tolerance | 50 Hz ± 5% / 60 Hz ± 5% |
| Power factor | > 0.99 |
| Current distorsion | ≤7% |
| BY PASS | |
| Voltage tolerance | 180 – 264 |
| Frequency tolerance | Frequency selected (from ±0.Hz to ±5Hz configurable) |
| Number phases | 1 |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 1000 VA |
| Active power | 800 W |
| Number phases | 1 |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinewave |
| Frequency | Can be selected: 50 Hz or 60 Hz or self-learning |
| Voltage distortion with distorcing load | < 4% |
| Voltage distortion with linear load | < 2% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 2 minutes |
| 125% = Load < 150% | 5 seconds |
| Load > 150% | 1 second |
| BATTERIES | |
| Type | VRLA AGM lead, maintenance-free |
| Typical recharge time | 2-4 h |
| ENVIRONMENTAL | |
| Altitude max | 6000 m |
| Color | Black |
| Communication | USB / DB9 with RS232 and contacts / Slot for communication interface |
| Safety compliance | EN 62040-1 and directive 2006/95/EL |
| EMC conformance | EN 620040-2 category C2 and directive 2004/108/EL |
| Accessories provided | Power cable, serial cable, USB cable, safety manual, quick start, software on CD-ROM |
| Protection rating | 3 |
| Surge capability | 300 joule |
| Marks | CE, GS/NEMKO |
| Line-Interactive/Smart Active efficiency | 98% |
| Noise | < 40 dBA @ 1 m |
| Operating temperature | 0°C / +40°C |
| Relative humidity | < 95% not condensed |
| DATA | |
| Weight | 13,3 Kg |
| Dimensions (h w d) | 158x422x235 mm |
SEP 1000 ER
| Models | SEP 1000 ER |
|---|---|
| INPUT | |
| Rated power | 1000 VA |
| Voltage | 220-230-240 Vac |
| Voltage tolerance | 140 Vac < Vin < 276 Vac @50% LOAD / 184 Vac < Vin < 276 Vac @ 100% LOAD |
| Frequency | 50/60 Hz |
| Frequency tolerance | 50 Hz ± 5% / 60 Hz ± 5% |
| Power factor | > 0.99 |
| Current distorsion | ≤7% |
| BY PASS | |
| Voltage tolerance | 180 – 264 |
| Frequency tolerance | Frequency selected (from ±0.Hz to ±5Hz configurable) |
| Number phases | 1 |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 1000 VA |
| Active power | 800 W |
| Number phases | 1 |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinewave |
| Frequency | Can be selected: 50 Hz or 60 Hz or self-learning |
| Voltage distortion with distorcing load | < 4% |
| Voltage distortion with linear load | < 2% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 2 minutes |
| 125% = Load < 150% | 5 seconds |
| Load > 150% | 1 second |
| BATTERIES | |
| Type | VRLA AGM lead, maintenance-free |
| Typical recharge time | N. A. |
| ENVIRONMENTAL | |
| Altitude max | 6000 m |
| Color | Black |
| Communication | USB / DB9 with RS232 and contacts / Slot for communication interface |
| Safety compliance | EN 62040-1 and directive 2006/95/EL |
| EMC conformance | EN 620040-2 category C2 and directive 2004/108/EL |
| Accessories provided | Power cable, serial cable, USB cable, safety manual, quick start, software on CD-ROM |
| Protection rating | 3 |
| Surge capability | 300 joule |
| Marks | CE, GS/NEMKO |
| Line-Interactive/Smart Active efficiency | 98% |
| Noise | < 40 dBA @ 1 m |
| Operating temperature | 0°C / +40°C |
| Relative humidity | < 95% not condensed |
| DATA | |
| Weight | 7 Kg |
| Dimensions (h w d) | 158x422x235 mm |
SEP 1500
| Models | SEP 1500 |
|---|---|
| INPUT | |
| Rated power | 1500 VA |
| Voltage | 220-230-240 Vac |
| Voltage tolerance | 140 Vac < Vin < 276 Vac @50% LOAD / 184 Vac < Vin < 276 Vac @ 100% LOAD |
| Frequency | 50/60 Hz |
| Frequency tolerance | 50 Hz ± 5% / 60 Hz ± 5% |
| Power factor | > 0.99 |
| Current distorsion | ≤7% |
| BY PASS | |
| Voltage tolerance | 180 – 264 |
| Frequency tolerance | Frequency selected (from ±0.Hz to ±5Hz configurable) |
| Number phases | 1 |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 1500 VA |
| Active power | 1200 W |
| Number phases | 1 |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinewave |
| Frequency | Can be selected: 50 Hz or 60 Hz or self-learning |
| Voltage distortion with distorcing load | < 4% |
| Voltage distortion with linear load | < 2% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 2 minutes |
| 125% = Load < 150% | 5 seconds |
| Load > 150% | 1 second |
| BATTERIES | |
| Type | VRLA AGM lead, maintenance-free |
| Typical recharge time | 2-4 h |
| ENVIRONMENTAL | |
| Altitude max | 6000 m |
| Color | Black |
| Communication | USB / DB9 with RS232 and contacts / Slot for communication interface |
| Safety compliance | EN 62040-1 and directive 2006/95/EL |
| EMC conformance | EN 620040-2 category C2 and directive 2004/108/EL |
| Accessories provided | Power cable, serial cable, USB cable, safety manual, quick start, software on CD-ROM |
| Protection rating | 3 |
| Surge capability | 300 joule |
| Marks | CE, GS/NEMKO |
| Line-Interactive/Smart Active efficiency | 98% |
| Noise | < 40 dBA @ 1 m |
| Operating temperature | 0°C / +40°C |
| Relative humidity | < 95% not condensed |
| DATA | |
| Weight | 14,8 Kg |
| Dimensions (h w d) | 158x422x235 mm |
SEP 2200
| Models | SEP 2200 |
|---|---|
| INPUT | |
| Rated power | 2200 VA |
| Voltage | 220-230-240 Vac |
| Voltage tolerance | 140 Vac < Vin < 276 Vac @50% LOAD / 184 Vac < Vin < 276 Vac @ 100% LOAD |
| Frequency | 50/60 Hz |
| Frequency tolerance | 50 Hz ± 5% / 60 Hz ± 5% |
| Power factor | > 0.99 |
| Current distorsion | ≤7% |
| BY PASS | |
| Voltage tolerance | 180 – 264 |
| Frequency tolerance | Frequency selected (from ±0.Hz to ±5Hz configurable) |
| Number phases | 1 |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 2200 VA |
| Active power | 1760 W |
| Number phases | 1 |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinewave |
| Frequency | Can be selected: 50 Hz or 60 Hz or self-learning |
| Voltage distortion with distorcing load | < 4% |
| Voltage distortion with linear load | < 2% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 2 minutes |
| 125% = Load < 150% | 5 seconds |
| Load > 150% | 1 second |
| BATTERIES | |
| Type | VRLA AGM lead, maintenance-free |
| Typical recharge time | 2-4 h |
| ENVIRONMENTAL | |
| Altitude max | 6000 m |
| Color | Black |
| Communication | USB / DB9 with RS232 and contacts / Slot for communication interface |
| Safety compliance | EN 62040-1 and directive 2006/95/EL |
| EMC conformance | EN 620040-2 category C2 and directive 2004/108/EL |
| Accessories provided | Power cable, serial cable, USB cable, safety manual, quick start, software on CD-ROM |
| Protection rating | 3 |
| Surge capability | 300 joule |
| Marks | CE, GS/NEMKO |
| Line-Interactive/Smart Active efficiency | 98% |
| Noise | < 40 dBA @ 1 m |
| Operating temperature | 0°C / +40°C |
| Relative humidity | < 95% not condensed |
| DATA | |
| Weight | 25,6 Kg |
| Dimensions (h w d) | 190x446x333 mm |
SEP 2200 ER
| Models | SEP 2200 ER |
|---|---|
| INPUT | |
| Rated power | 2200 VA |
| Voltage | 220-230-240 Vac |
| Voltage tolerance | 140 Vac < Vin < 276 Vac @50% LOAD / 184 Vac < Vin < 276 Vac @ 100% LOAD |
| Frequency | 50/60 Hz |
| Frequency tolerance | 50 Hz ± 5% / 60 Hz ± 5% |
| Power factor | > 0.99 |
| Current distorsion | ≤7% |
| BY PASS | |
| Voltage tolerance | 180 – 264 |
| Frequency tolerance | Frequency selected (from ±0.Hz to ±5Hz configurable) |
| Number phases | 1 |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 2200 VA |
| Active power | 1760 W |
| Number phases | 1 |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinewave |
| Frequency | Can be selected: 50 Hz or 60 Hz or self-learning |
| Voltage distortion with distorcing load | < 4% |
| Voltage distortion with linear load | < 2% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 2 minutes |
| 125% = Load < 150% | 5 seconds |
| Load > 150% | 1 second |
| BATTERIES | |
| Type | VRLA AGM lead, maintenance-free |
| Typical recharge time | N. A. |
| ENVIRONMENTAL | |
| Altitude max | 6000 m |
| Color | Black |
| Communication | USB / DB9 with RS232 and contacts / Slot for communication interface |
| Safety compliance | EN 62040-1 and directive 2006/95/EL |
| EMC conformance | EN 620040-2 category C2 and directive 2004/108/EL |
| Accessories provided | Power cable, serial cable, USB cable, safety manual, quick start, software on CD-ROM |
| Protection rating | 3 |
| Surge capability | 300 joule |
| Marks | CE, GS/NEMKO |
| Line-Interactive/Smart Active efficiency | 98% |
| Noise | < 40 dBA @ 1 m |
| Operating temperature | 0°C / +40°C |
| Relative humidity | < 95% not condensed |
| DATA | |
| Weight | 10,6 Kg |
| Dimensions (h w d) | 190x446x333 mm |
SEP 3000
| Models | SEP 3000 |
|---|---|
| INPUT | |
| Rated power | 3000 VA |
| Voltage | 220-230-240 Vac |
| Voltage tolerance | 140 Vac < Vin < 276 Vac @50% LOAD / 184 Vac < Vin < 276 Vac @ 100% LOAD |
| Frequency | 50/60 Hz |
| Frequency tolerance | 50 Hz ± 5% / 60 Hz ± 5% |
| Power factor | > 0.99 |
| Current distorsion | ≤7% |
| BY PASS | |
| Voltage tolerance | 180 – 264 |
| Frequency tolerance | Frequency selected (from ±0.Hz to ±5Hz configurable) |
| Number phases | 1 |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 3000 VA |
| Active power | 2400 W |
| Number phases | 1 |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinewave |
| Frequency | Can be selected: 50 Hz or 60 Hz or self-learning |
| Voltage distortion with distorcing load | < 4% |
| Voltage distortion with linear load | < 2% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 2 minutes |
| 125% = Load < 150% | 5 seconds |
| Load > 150% | 1 second |
| BATTERIES | |
| Type | VRLA AGM lead, maintenance-free |
| Typical recharge time | 2-4 h |
| ENVIRONMENTAL | |
| Altitude max | 6000 m |
| Color | Black |
| Communication | USB / DB9 with RS232 and contacts / Slot for communication interface |
| Safety compliance | EN 62040-1 and directive 2006/95/EL |
| EMC conformance | EN 620040-2 category C2 and directive 2004/108/EL |
| Accessories provided | Power cable, serial cable, USB cable, safety manual, quick start, software on CD-ROM |
| Protection rating | 3 |
| Surge capability | 300 joule |
| Marks | CE, GS/NEMKO |
| Line-Interactive/Smart Active efficiency | 98% |
| Noise | < 40 dBA @ 1 m |
| Operating temperature | 0°C / +40°C |
| Relative humidity | < 95% not condensed |
| DATA | |
| Weight | 28 Kg |
| Dimensions (h w d) | 190x446x333 mm |
SEP 3000 ER
| Models | SEP 3000 ER |
|---|---|
| INPUT | |
| Rated power | 3000 VA |
| Voltage | 220-230-240 Vac |
| Voltage tolerance | 140 Vac < Vin < 276 Vac @50% LOAD / 184 Vac < Vin < 276 Vac @ 100% LOAD |
| Frequency | 50/60 Hz |
| Frequency tolerance | 50 Hz ± 5% / 60 Hz ± 5% |
| Power factor | > 0.99 |
| Current distorsion | ≤7% |
| BY PASS | |
| Voltage tolerance | 180 – 264 |
| Frequency tolerance | Frequency selected (from ±0.Hz to ±5Hz configurable) |
| Number phases | 1 |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 3000 VA |
| Active power | 2400 W |
| Number phases | 1 |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinewave |
| Frequency | Can be selected: 50 Hz or 60 Hz or self-learning |
| Voltage distortion with distorcing load | < 4% |
| Voltage distortion with linear load | < 2% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 2 minutes |
| 125% = Load < 150% | 5 seconds |
| Load > 150% | 1 second |
| BATTERIES | |
| Type | VRLA AGM lead, maintenance-free |
| Typical recharge time | N. A. |
| ENVIRONMENTAL | |
| Altitude max | 6000 m |
| Color | Black |
| Communication | USB / DB9 with RS232 and contacts / Slot for communication interface |
| Safety compliance | EN 62040-1 and directive 2006/95/EL |
| EMC conformance | EN 620040-2 category C2 and directive 2004/108/EL |
| Accessories provided | Power cable, serial cable, USB cable, safety manual, quick start, software on CD-ROM |
| Protection rating | 3 |
| Surge capability | 300 joule |
| Marks | CE, GS/NEMKO |
| Line-Interactive/Smart Active efficiency | 98% |
| Noise | < 40 dBA @ 1 m |
| Operating temperature | 0°C / +40°C |
| Relative humidity | < 95% not condensed |
| DATA | |
| Weight | 14 Kg |
| Dimensions (h w d) | 190x446x333 mm |