Riello Multi Sentry (UPS systeem)

10-200kVA

MULTI SENTRY is een uninterruptible power supply state-of-the-art, dat het hoogst mogelijke niveau van de on-line dubbele conversie prestatie bereikt (VFI-SS-111), zoals gedefinieerd in IEC EN 62040-3.

De UPS is ontworpen om belangrijke informatie te beschermen en telecommunicatiesystemen, netwerken, diensten en processen waarvan de werking kan worden verstoord door een slechte voeding kwaliteit en / of onderbrekingen in de stroomtoevoer.

De beschikbare maten zijn: 10-12-15-20-30-40-60-80-100-120-160-200 kVA allemaal met een drie-fase-input en output. De MULTI SENTRY UPS is een van de meest efficiënte UPS systemen dat verkrijgbaar is met een minimale impact op het milieu en krachtbronnen.

Kenmerken

ZERO IMPACT SOURCE

MULTI SENTRY UPS zijn eenvoudig te installeren, vooral op plaatsen waar sprake is van een beperkte beschikbaarheid aan machtscapaciteit, een stand-by generator en potentieel harmonische compatibiliteitsproblemen:

– Lage input huidige vervorming – minder dan 3%
– Hoge input power factor 0,99
– Power walk-in functie om progressieve gelijkrichter startup te bereiken
– Uitgestelde startup op netspanning return



Multi Sentry levert een hoge specificatie filter ter bescherming van haar voedingen (hoofdnet of generator) tegen zowel harmonische als reactief gegenereerde lading.

ACCU CARE SYSTEM

De MULTI SENTRY Battery Care System optimaliseerd batterij prestaties om hun levensduur uit te breiden en ervoor te zorgen dat de UPS zijn volledige vastgestelde back-up tijd kan leveren wanneer het worden opgeroepen in geval van nood.
Batterij opladen: De MULTI SENTRY is ontworpen om te werken met VRLA AGM en GEL loodaccu’s zoals open geventileerd types, in aanvulling op de Ni-Cads.

Specifieke management functies zijn onder meer:

– Opladen op één-niveau om aan de eisen van de meest voorkomende VRLA AGM accu’s te
voldoen.
– Het opladen op twee spanningsniveaus aan de IU-kenmerken
– Beperkt het opladen om het elektrolyt verbruik te verminderen en verlengt de levensduur van VRLA batterijen.



Temperatuurcompensatie: om overmatige spanning te voorkomen worden de batterijen op een hoge omgevingstemperaturen toegepast.

Batterijtest: Om vermindering van de prestaties op te sporen en de batterijfalen te voorspellen.
Diepe ontlading bescherming: om te voorkomen dat de batterijen onder een niveau komen waaruit ze niet kunnen worden hersteld (met name bij ontlading met zeer lage belastingen gedurende een lange periode). Lage AC rimpelspanning: van een hoogfrequente batterijlader om te zorgen dat de accu’s bestand zijn tegen schadelijke elementen, soms bij enkele andere UPS en voeding ontwerpen. Breed ingangsspanning: uit een gelijkrichter die naar beneden kan werken tot minder dan 40% van de nominale spanningsvermogen (bij halve belasting), het verwijderen van de noodzaak om de batterijen te ontladen.

MCM 10

ModelsMCM 10
INPUT
Rated power10000 VA
Voltage230 Vac single-phase or 400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage230
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases1
OUTPUT and INVERTER OUTPUT
Rated power10000 VA
Active power9000 W
Number phases1
Output current45 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<48 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight180 Kg
Dimensions (h w d)930x320x840 mm

MCM 12

ModelsMCM 12
INPUT
Rated power12000 VA
Voltage230 Vac single-phase or 400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage230
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases1
OUTPUT and INVERTER OUTPUT
Rated power12000 VA
Active power10800 W
Number phases1
Output current55 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<48 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight182 Kg
Dimensions (h w d)930x320x840 mm

MCM 15

ModelsMCM 15
INPUT
Rated power15000 VA
Voltage230 Vac single-phase or 400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage230
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases1
OUTPUT and INVERTER OUTPUT
Rated power15000 VA
Active power13500 W
Number phases1
Output current68 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<52 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight190 Kg
Dimensions (h w d)930x320x840 mm

MCM 20

ModelsMCM 20
INPUT
Rated power20000 VA
Voltage230 Vac single-phase or 400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage230
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases1
OUTPUT and INVERTER OUTPUT
Rated power20000 VA
Active power18000 W
Number phases1
Output current91 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<52 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight195 Kg
Dimensions (h w d)930x320x840 mm

MSM 10

ModelsMSM 10
INPUT
Rated power10000 VA
Voltage230 Vac single-phase or 400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage230
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases1
OUTPUT and INVERTER OUTPUT
Rated power10000 VA
Active power9000 W
Number phases1
Output current45 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<48 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight305 Kg
Dimensions (h w d)1320x440x850 mm

MSM 12

ModelsMSM 12
INPUT
Rated power12000 VA
Voltage230 Vac single-phase or 400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage230
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases1
OUTPUT and INVERTER OUTPUT
Rated power12000 VA
Active power10800 W
Number phases1
Output current55 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<48 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight310 Kg
Dimensions (h w d)1320x440x850 mm

MSM 15

ModelsMSM 15
INPUT
Rated power15000 VA
Voltage230 Vac single-phase or 400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage230
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases1
OUTPUT and INVERTER OUTPUT
Rated power15000 VA
Active power13500 W
Number phases1
Output current68 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<52 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight315 Kg
Dimensions (h w d)1320x440x850 mm

MSM 20

ModelsMSM 20
INPUT
Rated power20000 VA
Voltage230 Vac single-phase or 400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage230
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases1
OUTPUT and INVERTER OUTPUT
Rated power20000 VA
Active power18000 W
Number phases1
Output current91 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<52 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight320 Kg
Dimensions (h w d)1320x440x850 mm

MCT 10

ModelsMCT 10
INPUT
Rated power10000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power10000 VA
Active power9000 W
Number phases3
Output current15 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<48 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight180 Kg
Dimensions (h w d)930x320x840 mm

MCT 12

ModelsMCT 12
INPUT
Rated power12000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power12000 VA
Active power10800 W
Number phases3
Output current17 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<48 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight182 Kg
Dimensions (h w d)930x320x840 mm

MCT 15

ModelsMCT 15
INPUT
Rated power15000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power15000 VA
Active power13500 W
Number phases3
Output current22 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<52 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight190 Kg
Dimensions (h w d)930x320x840 mm

MCT 20

ModelsMCT 20
INPUT
Rated power20000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power20000 VA
Active power18000 W
Number phases3
Output current29 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<52 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight195 Kg
Dimensions (h w d)930x320x840 mm

MST 10

ModelsMST 10
INPUT
Rated power10000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power10000 VA
Active power9000 W
Number phases3
Output current29 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<52 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight305 Kg
Dimensions (h w d)1320x440x850 mm

MST 12

ModelsMST 12
INPUT
Rated power12000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power12000 VA
Active power10800 W
Number phases3
Output current17 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<48 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight310 Kg
Dimensions (h w d)1320x440x850 mm

MST 15

ModelsMST 15
INPUT
Rated power15000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power15000 VA
Active power13500 W
Number phases3
Output current22 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<52 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight315 Kg
Dimensions (h w d)1320x440x850 mm

MST 20

ModelsMST 20
INPUT
Rated power20000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power20000 VA
Active power18000 W
Number phases3
Output current29 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<52 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight320 Kg
Dimensions (h w d)930x320x840 mm

MST 30

ModelsMST 30
INPUT
Rated power30000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power30000 VA
Active power27000 W
Number phases3
Output current43 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<52 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight335 Kg
Dimensions (h w d)1320x440x850 mm

MST 40

ModelsMST 40
INPUT
Rated power40000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power40000 VA
Active power36000 W
Number phases3
Output current58 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<52 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight350 Kg
Dimensions (h w d)1320x440x850 mm

MST 60

ModelsMST 60
INPUT
Rated power60000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power60000 VA
Active power54000 W
Number phases3
Output current86 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<52 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight190 Kg
Dimensions (h w d)1600x500x850 mm

MST 80

ModelsMST 80
INPUT
Rated power80000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power80000 VA
Active power72000 W
Number phases3
Output current116 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<52 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight200 Kg
Dimensions (h w d)1600x500x850 mm

MST 100

ModelsMST 100
INPUT
Rated power100000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power100000 VA
Active power90000 W
Number phases3
Output current145 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>95%
Line-Interactive/Smart Active efficiency>98%
Noise<56 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight220 Kg
Dimensions (h w d)1600x500x850 mm

MST 125

ModelsMST 125
INPUT
Rated power125000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power125000 VA
Active power112500 W
Number phases3
Output current182 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>94%
Line-Interactive/Smart Active efficiency>98%
Noise<63 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight250 Kg
Dimensions (h w d)1600x650x840 mm

MST 160

ModelsMST 160
INPUT
Rated power160000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power160000 VA
Active power160000 W
Number phases3
Output current232 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>96%
Line-Interactive/Smart Active efficiency>98%
Noise<50 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight450 Kg
Dimensions (h w d)1900x850x1050 mm

MST 200

ModelsMST 200
INPUT
Rated power200000 VA
Voltage400 Vac three-phase + N Vac
Voltage tolerance± 20%
Frequency tolerance40/72 Hz
Power factor0.99
BY PASS
Rated voltage400
Voltage tolerance± 15% (selectable from ± 5% to ± 25%)
Rated frequency50/60 Hz
Frequency tolerance± 5% (selectable from ± 0.25% to ± 10%)
Number phases3
OUTPUT and INVERTER OUTPUT
Rated power200000 VA
Active power200000 W
Number phases3
Output current290 A
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Static stability± 1%
Dynamic stability± 3% in 10 ms
Frequency50/60 Hz selectable
Voltage distortion with distorcing load3%
Voltage distortion with linear load1%
Overload125% 150% 168% of the rated current for 10′ / 1′ / 5
BATTERIES
TypeMaintenance-free sealed lead acid
Typical recharge time6 h
ENVIRONMENTAL
ColorDark grey RAL 7016
Remote controlsEPO and bypass
CommunicationDouble RS232/C , slot for SNMP adapter and slot for voltage free contacts.
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Lev.A and Directive 73/23 EEC, 93/68 EEC, 89/336 EEC
Protection rating3
AC/AC efficiency>96%
Line-Interactive/Smart Active efficiency>98%
Noise<50 dBA at 1 m
Remote signalsvoltage free contacts
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight460 Kg
Dimensions (h w d)1900x850x1050 mm