RIello Master MPS (UPS systeem)
Master MPS-serie UPS-apparaten zorgen voor een maximale bescherming en power kwaliteit voor elk type lading, vooral voor bedrijf kritische applicaties, security systemen en elektro-medische apparatuur, industriële processen en telecommunicatie. Master Plus is een on-line dubbele conversie UPS (klasse VFI SS 111 in overeenstemming met IEC EN 62040-3) met een transformator geïsoleerde omvormer.Kenmerken
ACCU zorgsysteem: MAXIMUM BATTERIJ CARE
Normaal gesproken worden de accu’s opgeladen gehouden door de gelijkrichter; wanneer de stroom uitvalt. De UPS gebruikt deze energiebron om haar hulpprogramma’s aan te drijven. Daarom is een goede verzorging van de batterij cruciaal voor de correcte werking van de UPS in noodsituaties.
Batterij Care System bestaat uit een reeks van functies en mogelijkheden die het mogelijk maken om de batterij management de best mogelijke prestaties te laten leveren en hun levensduur uit te breiden.
– Dual niveau heffingssysteem voor het laden, stromen en optimaliseren en kosten te verlagen.
– Temperatuurcompensatie en diepe ontlaadbescherming om de totale batterij veroudering te verminderen.
– Charge blokkeersysteem om het verbruik van elektrolyt te verminderen en de levensduur van de VRLA batterijen te verlengen.
– Vooraf een batterijtest voor het diagnosticeren van de vermindering van de prestaties of problemen met de accu’s.
– Temperatuurcompensatie en diepe ontlaadbescherming om de totale batterij veroudering te verminderen.
– Charge blokkeersysteem om het verbruik van elektrolyt te verminderen en de levensduur van de VRLA batterijen te verlengen.
– Vooraf een batterijtest voor het diagnosticeren van de vermindering van de prestaties of problemen met de accu’s.
Master MPS is ook compatibel met verschillende accutechnologieën: geventileerde geopend lood-zuur, VRLA AGM en NiCd.
Geavanceerde communicatie
– Compatibel met Teleguard voor teleassistentie.
– Geavanceerde communicatie en Multi platform voor alle besturingssystemen en netwerkomgevingen: Toezicht en shutdown PowerShield 3-software voor Windows-besturingssystemen 7, 2008, Vista, 2003, XP, Linux, Mac OS X, Zon Solaris, Linux, Novell en andere Unix-besturingssystemen.
– UPS wordt geleverd met een kabel voor directe aansluiting op een PC (Plug and Play)
– RS232 dubbele seriële poort
– Slot voor netwerkadapter installatie; ESD contact (Emergency Switching Device) voor het uitschakelen van de UPS door de noodsituatietoets op afstandsbediening.
– Geleid Remote mimiek paneel of grafische weergave.
– Geavanceerde communicatie en Multi platform voor alle besturingssystemen en netwerkomgevingen: Toezicht en shutdown PowerShield 3-software voor Windows-besturingssystemen 7, 2008, Vista, 2003, XP, Linux, Mac OS X, Zon Solaris, Linux, Novell en andere Unix-besturingssystemen.
– UPS wordt geleverd met een kabel voor directe aansluiting op een PC (Plug and Play)
– RS232 dubbele seriële poort
– Slot voor netwerkadapter installatie; ESD contact (Emergency Switching Device) voor het uitschakelen van de UPS door de noodsituatietoets op afstandsbediening.
– Geleid Remote mimiek paneel of grafische weergave.
Brochure
Riello Master MPS brochure
MPM 10
| Models | MPM 10 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0-100% in 10 |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 360-400-420 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 10000 VA |
| Active power | 9000 W |
| Output Voltage | 220 – 230 – 240 Vac single-phase + N (selectable) |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 60 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 200 Kg |
| Dimensions (h w d) | 1400 x 555 x 740 mm |
MPM 15
| Models | MPM 15 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 360-400-420 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 15000 VA |
| Active power | 13500 W |
| Output Voltage | 220 – 230 – 240 Vac single-phase + N (selectable) |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 60 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 220 Kg |
| Dimensions (h w d) | 1400 x 555 x 740 mm |
MPM 20
| Models | MPM 20 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 360-400-420 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 20000 VA |
| Active power | 18000 W |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 60 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 230 Kg |
| Dimensions (h w d) | 1400 x 555 x 740 mm |
MPM 30
| Models | MPM 30 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 360-400-420 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 30000 VA |
| Active power | 27000 W |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 62 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 270 Kg |
| Dimensions (h w d) | 1400 x 555 x 740 mm |
MPM 40
| Models | MPM 40 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 360-400-420 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 40000 VA |
| Active power | 36000 W |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 62 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 302 Kg |
| Dimensions (h w d) | 1400 x 555 x 740 mm |
MPM 60
| Models | MPM 60 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 360-400-420 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 60000 VA |
| Active power | 54000 W |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 62 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 440 Kg |
| Dimensions (h w d) | 1400 x 800 x 740 mm |
MPM 80
| Models | MPM 80 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 360-400-420 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 80000 VA |
| Active power | 72000 W |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 62 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 500 Kg |
| Dimensions (h w d) | 1400 x 800 x 740 mm |
MPM 100
| Models | MPM 100 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 360-400-420 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 100000 VA |
| Active power | 90000 W |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 62 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 580 Kg |
| Dimensions (h w d) | 1900 x 800 x 800 mm |
MPT 10
| Models | MPT 10 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 360-400-420 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 100000 VA |
| Active power | 90000 W |
| Output Voltage | 380 – 400 – 415 Vac three-phase + N (selectable) |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 60 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 228 Kg |
| Dimensions (h w d) | 1400 x 555 x 740 mm |
MPT 15
| Models | MPT 15 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 360-400-420 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 15000 VA |
| Active power | 13500 W |
| Output Voltage | 380 – 400 – 415 Vac three-phase + N (selectable) |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 60 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 241 Kg |
| Dimensions (h w d) | 1400 x 555 x 740 mm |
MPT 20
| Models | MPT 20 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 360-400-420 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 20000 VA |
| Active power | 18000 W |
| Output Voltage | 380 – 400 – 415 Vac three-phase + N (selectable) |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 60 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 256 Kg |
| Dimensions (h w d) | 1400 x 555 x 740 mm |
MPT 30
| Models | MPT 30 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 360-400-420 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 30000 VA |
| Active power | 27000 W |
| Output Voltage | 380 – 400 – 415 Vac three-phase + N (selectable) |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 60 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 315 Kg |
| Dimensions (h w d) | 1400 x 555 x 740 mm |
MPT 40
| Models | MPT 40 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 380 – 400 – 415 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 40000 VA |
| Active power | 36000 W |
| Output Voltage | 380 – 400 – 415 Vac three-phase + N (selectable) |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 62 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 460 Kg |
| Dimensions (h w d) | 1400 x 800 x 740 mm |
MPT 60
| Models | MPT 60 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 380 – 400 – 415 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 60000 VA |
| Active power | 54000 W |
| Output Voltage | 380 – 400 – 415 Vac three-phase + N (selectable) |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 62 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 460 Kg |
| Dimensions (h w d) | 1400 x 800 x 740 mm |
MPT 80
| Models | MPT 80 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 380 – 400 – 415 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 80000 VA |
| Active power | 72000 W |
| Output Voltage | 380 – 400 – 415 Vac three-phase + N (selectable) |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 62 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 540 Kg |
| Dimensions (h w d) | 1400 x 800 x 740 mm |
MPT 100
| Models | MPT 100 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 380 – 400 – 415 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 100000 VA |
| Active power | 90000 W |
| Output Voltage | 380 – 400 – 415 Vac three-phase + N (selectable) |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 62 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 600 Kg |
| Dimensions (h w d) | 1900 x 800 x 800 mm |
MPT 120
| Models | MPT 120 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 380 – 400 – 415 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 120000 VA |
| Active power | 108000 W |
| Output Voltage | 380 – 400 – 415 Vac three-phase + N (selectable) |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 68 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 610 Kg |
| Dimensions (h w d) | 1900 x 800 x 800 mm |
MPT 160
| Models | MPT 160 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 380 – 400 – 415 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 160000 VA |
| Active power | 144000 W |
| Output Voltage | 380 – 400 – 415 Vac three-phase + N (selectable) |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 60 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 690 Kg |
| Dimensions (h w d) | 1900 x 800 x 800 mm |
MPT 200
| Models | MPT 200 |
|---|---|
| INPUT | |
| Voltage | 380 – 400 – 415 Vac three-phase Vac |
| Frequency | 45 – 65 Hz |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Soft start | 0 – 100% in 120’’ (selectable) |
| Voltage Range | 400 V + 20% /- 25% |
| BY PASS | |
| Rated voltage | 380 – 400 – 415 Vac three-phase + N |
| Rated frequency | 50 or 60 Hz (selectable) |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 200000 VA |
| Active power | 180000 W |
| Output Voltage | 380 – 400 – 415 Vac three-phase + N (selectable) |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Static stability | ± 1% |
| Dynamic stability | ± 5% in 10 ms |
| Frequency | 50 or 60 Hz (selectable) |
| Voltage distortion with distorcing load | < 3% with non-linear load |
| Voltage distortion with linear load | < 1% with linear load |
| Frequency stability | 0.05% |
| OVERLOAD TIMES | |
| 100% < Load < 110% | 60′ |
| 125% = Load < 150% | 10′ |
| Load = 150% | 1′ |
| BATTERIES | |
| Type | VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels |
| ENVIRONMENTAL | |
| Color | Dark grey RAL 7016 |
| Communication | Double RS232 + dry contacts + 2 slots for communications interface |
| Safety compliance | IEC EN 62040-1 |
| EMC conformance | IEC EN 62040-2 |
| Protection rating | IP20 |
| Line-Interactive/Smart Active efficiency | up to 98% |
| Noise | 60 dBA |
| Operating temperature | 0 °C/ +40 °C |
| Relative humidity | <95% non-condensing |
| DATA | |
| Weight | 790 Kg |
| Dimensions (h w d) | 1900 x 800 x 800 mm |