Master Industrial UPS systeem

Master Industriële serie UPS bieden maximale bescherming en power quality voor elk type lading, met name industriële toepassingen, zoals productie en petrochemische processen, elektrische distributie en energiecentrales. Master Industrial is een on-line dubbele conversie UPS (klasse VFI SS 111 in overeenstemming met IEC EN 62040-3) met input en output isolatietransformatoren.

Industriële omgeving

Master Industrial is geschikt voor de meest veeleisende installatie omgevingen waar er trillingen, mechanische belasting, stof en in het algemeen waar de bedrijfsomstandigheden zijn ongunstig voor producten gemaakt voor de standaard UPS-markt.

Hoge ICC

De hoge kortsluitstroom (ICC = 3) maakt het geschikt voor ladingen die hoge stroompieken vereisen wanneer ingeschakeld of tijdens normaal gebruik.

Continue voltage 220 V

De ingang en de omvormer transformatoren garanderen dat de isolatie van de batterijen, die kleinbedrijf voor een spanning van 220 V DC (108-114 elementen) zijn, de standaard industriële waarde.

Redundante ventilatie

Redundante ventilatie bij 100% belasting is standaard, waardoor de werking met een normale belasting met de helft van de fans opereren; bovendien wordt elke ventilator bewaakt en een alarmsignaal wordt gegeven in het geval van mislukking. De Easy Source invoerfuncties de Accu Care System, en de flexibiliteit en communicatiemogelijkheden zijn dezelfde als die van de conventionele master MPS bereik.

Kenmerken

  • Scheidingstransformator;
  • Synchronisatie apparaat (UGS);
  • Hot-verbinding apparaat (PSJ);
  • Generator-interface;
  • Parallelle configuratie kit (Closed Loop);
  • Batterij kasten leeg of voor langere looptijden;
  • Top Cable Entry kasten;
  • IP-klasse IP31 / IP42.

    • MIM 80

    Models MIM 80
    INPUT
    Rated power 80000 VA
    Voltage 400 Vac three-phase Vac
    Voltage tolerance ± 20%
    Frequency 50/60 Hz with autorange
    Frequency tolerance 45/65 Hz
    Power factor 0.93
    Current distorsion <5%
    Soft start 0-100% in 10″
    BY PASS
    Rated voltage 400 Vac three-phase selectable 380 and 415
    Voltage tolerance ± 15% (selectable from ± 10% to ± 25% from front panel)
    Rated frequency 50/60 Hz (autorange)
    Frequency tolerance ± 2% (selectable from ± 1% to ± 5% from front panel)
    Number phases 3
    Back-feed protection yes
    Overload capacity Inx10ms 14
    OUTPUT and INVERTER OUTPUT
    Rated power 80000 VA
    Active power 64000 W
    Number phases 3 + N
    Crest factor (Ipeak/Irms) 3 : 1
    Waveform Sinewave
    Static stability ± 1%
    Dynamic stability ± 5% in 5 ms
    Frequency same as the input (autorange)
    Voltage distortion with distorcing load <3%
    Voltage distortion with linear load 1% (rated) 2% (max)
    Frequency stability ± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present
    Inverter efficiency at rated load 95% %
    Overload 125% 150% 200% of the rated current for 10^ / 1^ / 7§
    RECTIFIER OUTPUT
    Ripple <1%
    BATTERIES
    Type Maintenance-free sealed lead-acid
    Maximum recharge current 0.2xC10
    ENVIRONMENTAL
    Altitude max 1000 m
    Color Light grey RAL 7035
    Remote controls EPO and bypass
    Safety compliance EN 62040-1
    EMC conformance EN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3
    Protection rating 3
    Cooling (type) redundant fans
    AC/AC efficiency 92,5%
    Noise 63 dBA at 1 m
    Remote signals voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)
    Operating temperature 0 ÷ 40 °C
    Relative humidity 95% no condensing
    DATA
    Weight 1500 Kg
    Dimensions (h w d) 1900x1600x800 mm

    MIM 40

    Models MIM 40
    INPUT
    Rated power 40000 VA
    Voltage 400 Vac three-phase Vac
    Voltage tolerance ± 20%
    Frequency 50/60 Hz with autorange
    Frequency tolerance 45/65 Hz
    Power factor 0.93
    Current distorsion <5%
    Soft start 0-100% in 120″ configurable
    BY PASS
    Rated voltage 400 Vac three-phase selectable 380 and 415
    Voltage tolerance ± 15% (selectable from ± 10% to ± 25% from front panel)
    Rated frequency 50/60 Hz (autorange)
    Frequency tolerance ± 2% (selectable from ± 1% to ± 5% from front panel)
    Number phases 3
    Back-feed protection yes
    Overload capacity Inx10ms 14
    OUTPUT and INVERTER OUTPUT
    Rated power 40000 VA
    Active power 32000 W
    Number phases 3 + N
    Crest factor (Ipeak/Irms) 3 : 1
    Waveform Sinewave
    Static stability ± 1%
    Dynamic stability ± 5% in 5 ms
    Frequency same as the input (autorange)
    Voltage distortion with distorcing load <3%
    Voltage distortion with linear load 1% (rated) 2% (max)
    Frequency stability ± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present
    Inverter efficiency at rated load 95% %
    Overload 125% 150% 200% of the rated current for 10^ / 1^ / 7§
    RECTIFIER OUTPUT
    Ripple <1%
    BATTERIES
    Type Maintenance-free sealed lead-acid
    Maximum recharge current 0.2xC10
    ENVIRONMENTAL
    Altitude max 1000 m
    Color Light grey RAL 7035
    Remote controls EPO and bypass
    Safety compliance EN 62040-1
    EMC conformance EN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3
    Protection rating 3
    Cooling (type) redundant fans
    AC/AC efficiency 92,5%
    Noise 63 dBA at 1 m
    Remote signals voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)
    Operating temperature 0 ÷ 40 °C
    Relative humidity 95% no condensing
    DATA
    Weight 900 KG
    Dimensions (h w d) 1900x800x800 mm

    MIM 60

    Models MIM 60
    INPUT
    Rated power 60000 VA
    Voltage 400 Vac three-phase Vac
    Voltage tolerance ± 20%
    Frequency 50/60 Hz with autorange
    Frequency tolerance 45/65 Hz
    Power factor 0.93
    Current distorsion <5%
    Soft start 0-100% in 10″
    BY PASS
    Rated voltage 400 Vac three-phase selectable 380 and 415
    Voltage tolerance ± 15% (selectable from ± 10% to ± 25% from front panel)
    Rated frequency 50/60 Hz (autorange)
    Frequency tolerance ± 2% (selectable from ± 1% to ± 5% from front panel)
    Number phases 3
    Back-feed protection yes
    Overload capacity Inx10ms 14
    OUTPUT and INVERTER OUTPUT
    Rated power 60000 VA
    Active power 48000 W
    Number phases 3 + N
    Crest factor (Ipeak/Irms) 3 : 1
    Waveform Sinewave
    Static stability ± 1%
    Dynamic stability ± 5% in 5 ms
    Frequency same as the input (autorange)
    Voltage distortion with distorcing load <3%
    Voltage distortion with linear load 1% (rated) 2% (max)
    Frequency stability ± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present
    Inverter efficiency at rated load 95% %
    Overload 125% 150% 200% of the rated current for 10^ / 1^ / 7§
    RECTIFIER OUTPUT
    Ripple <1%
    BATTERIES
    Type Maintenance-free sealed lead-acid
    Maximum recharge current 0.2xC10
    ENVIRONMENTAL
    Altitude max 1000 m
    Color Light grey RAL 7035
    Remote controls EPO and bypass
    Safety compliance EN 62040-1
    EMC conformance EN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3
    Protection rating 3
    Cooling (type) redundant fans
    AC/AC efficiency 92,5%
    Noise 63 dBA at 1 m
    Remote signals voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)
    Operating temperature 0 ÷ 40 °C
    Relative humidity 95% no condensing
    DATA
    Weight 1400 Kg
    Dimensions (h w d) 1900x1600x800 mm

    MIM 30

    Models MIM 30
    INPUT
    Rated power 30000 VA
    Voltage 400 Vac three-phase Vac
    Voltage tolerance ± 20%
    Frequency 50/60 Hz with autorange
    Frequency tolerance 45/65 Hz
    Power factor 0.93
    Input current 145 A
    Current distorsion <3% in 12MP HC version
    Soft start 0-100% in 120″ configurable
    BY PASS
    Rated voltage 400 Vac three-phase selectable 380 and 415
    Voltage tolerance ± 15% (selectable from ± 10% to ± 25% from front panel)
    Rated frequency 50/60 Hz (autorange)
    Frequency tolerance ± 2% (selectable from ± 1% to ± 5% from front panel)
    Rated current 145 A
    Number phases 3
    Back-feed protection yes
    Overload capacity Inx10ms 14
    OUTPUT and INVERTER OUTPUT
    Rated power 30000 VA
    Active power 24000 W
    Number phases 3 + N
    Crest factor (Ipeak/Irms) 3 : 1
    Waveform Sinewave
    Static stability ± 1%
    Dynamic stability ± 5% in 5 ms
    Frequency same as the input (autorange)
    Voltage distortion with distorcing load <3%
    Voltage distortion with linear load 1% (rated) 2% (max)
    Frequency stability ± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present
    Inverter efficiency at rated load 95% %
    Overload 125% 150% 200% of the rated current for 10^ / 1^ / 7§
    RECTIFIER OUTPUT
    Ripple <1%
    BATTERIES
    Type Maintenance-free sealed lead-acid
    Maximum recharge current 0.2xC10
    ENVIRONMENTAL
    Altitude max 1000 m
    Color Light grey RAL 7035
    Remote controls EPO and bypass
    Safety compliance EN 62040-1
    EMC conformance EN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3
    Protection rating 3
    Cooling (type) redundant fans
    AC/AC efficiency 92,5%
    Noise 63 dBA at 1 m
    Remote signals voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)
    Operating temperature 0 ÷ 40 °C
    Relative humidity 95% no condensing
    DATA
    Weight 850 Kg
    Dimensions (h w d) 1900x800x800 mm