Riello Master HP (UPS systeem)
De MASTER MPS assortiment is uitgebreid met de HP-serie beschikbaar in 100-600 kVA. MASTER HP-serie biedt maximale bescherming en power quality voor datacenters en industriële belastingen. De UPS heeft een IGBT gebaseerde gelijkrichter, DSP (Digital Signal Processor) technologie en zorgt voor echte online, dubbele conversie bescherming tegen stroomuitval, (VFI SS 11 - Spanning en frequentie Independent volgens IEC EN 62040-3). De HP-serie biedt een uitstekende operationele efficiëntie (meer dan de meeste conventionele thyristor-gelijkrichter gebaseerde systemen), een compact en eenvoudig toegang tot onderhoud - alle ideaal voor de hedendaagse kritische omgevingen.Kenmerken
ZERO IMPACT SOURCE
Als een evolutie van de MASTER-serie, beschikt de HP over de toegevoegde voordelen van een IGBT-gebaseerde gelijkrichter montage. Dit reduceert het effect van de UPS op de lokale levering en eenvoudige installatie waar beperkte bevoegdheid capaciteit is in de vorm van beschikbare stroomtoevoer van reizigers of generator grootte.
De MASTER HP wordt aangemerkt als een ‘Zero Impact Source’ en luidt als volgt:
– Lage ingang huidige vervorming – minder dan 2,5%
– Hoge input power factor 0,99
– Vermogen walk-in functie die zorgt voor opstarten van progressieve gelijkrichter.
– Uitgestelde en gefaseerde startup met de terugkeer van het stroomnet, wanneer meerdere UPS in het systeem zijn aangesloten.
– Hoge input power factor 0,99
– Vermogen walk-in functie die zorgt voor opstarten van progressieve gelijkrichter.
– Uitgestelde en gefaseerde startup met de terugkeer van het stroomnet, wanneer meerdere UPS in het systeem zijn aangesloten.
MASTER HP vervult de rol van een hoogwaardige filter en beschermt het stroomopwaartse voedingsbronnen van elke harmonische en reactief vermogen dat gegenereerd en aangedreven worden door de belastingen.
Belangrijkste kenmerken
– Hoog uitgangsvermogen
– Compact formaat: slechts 0.85 m 2 een 250 kVA UPS
– Vermindert het gewicht
– Dubbele bescherming van de lading, zowel elektronische als galvanische, voor de accu.
– Compact formaat: slechts 0.85 m 2 een 250 kVA UPS
– Vermindert het gewicht
– Dubbele bescherming van de lading, zowel elektronische als galvanische, voor de accu.
Brochure
Riello Sentinel Power Green brochure
MHT 100
| Models | MHT 100 |
|---|---|
| INPUT | |
| Rated power | 100000 VA |
| Voltage | 400 Vac three-phase Vac |
| Voltage tolerance | + 20% – 25% |
| Frequency | 50/60 Hz with autorange |
| Frequency tolerance | 45/65 Hz |
| Power factor | 0,99 |
| Input current | 141 A |
| Current distorsion | <3% |
| Soft start | 0-100% in 10 |
| BY PASS | |
| Rated voltage | 400 Vac three-phase selectable 380 and 415 |
| Voltage tolerance | ± 15% (selectable from ± 10% to ± 25% from front panel) |
| Rated frequency | 50/60 Hz (autorange) |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Rated current | 141 A |
| Number phases | 3 |
| Back-feed protection | yes |
| Overload capacity Inx10ms | 14 |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 100000 VA |
| Active power | 90000 W |
| Number phases | 3 + N |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinewave |
| Dynamic stability | ± 5% in 5 ms |
| Frequency | same as the input (autorange) |
| Voltage distortion with distorcing load | <3% |
| Voltage distortion with linear load | <1% |
| Frequency stability | ± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present |
| Overload | 110 % 125% 150% 200% of the rated current for 10′ / 1′ / 7 |
| RECTIFIER OUTPUT | |
| Ripple | <1% |
| BATTERIES | |
| Type | Maintenance-free sealed lead-acid |
| Maximum recharge current | 0.2xC10 |
| ENVIRONMENTAL | |
| Altitude max | 1000 m |
| Color | Dark grey RAL 7035 |
| Remote controls | EPO and bypass |
| Safety compliance | EN 62040-1 |
| EMC conformance | EN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3 |
| Protection rating | 3 |
| Line-Interactive/Smart Active efficiency | up to 98,5% |
| Noise | 63 dBA at 1 m |
| Remote signals | voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA) |
| Operating temperature | 0 ÷ 40 °C |
| Relative humidity | 95% no condensing |
| DATA | |
| Weight | 656 Kg |
| Dimensions (h w d) | 1900x800x850 mm |
MHT 120
| Models | MHT 120 |
|---|---|
| INPUT | |
| Rated power | 120000 VA |
| Voltage | 400 Vac three-phase Vac |
| Voltage tolerance | + 20% – 25% |
| Frequency | 50/60 Hz with autorange |
| Frequency tolerance | 45/65 Hz |
| Power factor | 0,99 |
| Input current | 169 A |
| Current distorsion | <3% |
| Soft start | 0-100% in 10 |
| BY PASS | |
| Rated voltage | 400 Vac three-phase selectable 380 and 415 |
| Voltage tolerance | ± 15% (selectable from ± 10% to ± 25% from front panel) |
| Rated frequency | 50/60 Hz (autorange) |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Rated current | 169 A |
| Number phases | 3 |
| Back-feed protection | yes |
| Overload capacity Inx10ms | 14 |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 120000 VA |
| Active power | 108000 W |
| Number phases | 3 + N |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinewave |
| Dynamic stability | ± 5% in 5 ms |
| Frequency | same as the input (autorange) |
| Voltage distortion with distorcing load | <3% |
| Voltage distortion with linear load | <1% |
| Frequency stability | ± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present |
| Overload | 110 % 125% 150% 200% of the rated current for 10′ / 1′ / 7 |
| RECTIFIER OUTPUT | |
| Ripple | <1% |
| BATTERIES | |
| Type | Maintenance-free sealed lead-acid |
| Maximum recharge current | 0.2xC10 |
| ENVIRONMENTAL | |
| Altitude max | 1000 m |
| Color | Dark grey RAL 7035 |
| Remote controls | EPO and bypass |
| Safety compliance | EN 62040-1 |
| EMC conformance | EN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3 |
| Protection rating | 3 |
| Line-Interactive/Smart Active efficiency | up to 98,5% |
| Noise | 63 dBA at 1 m |
| Remote signals | voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA) |
| Operating temperature | 0 ÷ 40 °C |
| Relative humidity | 95% no condensing |
| DATA | |
| Weight | 700 Kg |
| Dimensions (h w d) | 1900x800x850 mm |
MHT 160
| Models | MHT 160 |
|---|---|
| INPUT | |
| Rated power | 160000 VA |
| Voltage | 400 Vac three-phase Vac |
| Voltage tolerance | + 20% – 25% |
| Frequency | 50/60 Hz with autorange |
| Frequency tolerance | 45/65 Hz |
| Power factor | 0,99 |
| Input current | 226 A |
| Current distorsion | <3% |
| Soft start | 0-100% in 10 |
| BY PASS | |
| Rated voltage | 400 Vac three-phase selectable 380 and 415 |
| Voltage tolerance | ± 15% (selectable from ± 10% to ± 25% from front panel) |
| Rated frequency | 50/60 Hz (autorange) |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Rated current | 226 A |
| Number phases | 3 |
| Back-feed protection | yes |
| Overload capacity Inx10ms | 14 |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 160000 VA |
| Active power | 144000 W |
| Number phases | 3 + N |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinewave |
| Dynamic stability | ± 5% in 5 ms |
| Frequency | same as the input (autorange) |
| Voltage distortion with distorcing load | <3% |
| Voltage distortion with linear load | <1% |
| Frequency stability | ± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present |
| Overload | 110 % 125% 150% 200% of the rated current for 10′ / 1′ / 7 |
| RECTIFIER OUTPUT | |
| Ripple | <1% |
| BATTERIES | |
| Type | Maintenance-free sealed lead-acid |
| Maximum recharge current | 0.2xC10 |
| ENVIRONMENTAL | |
| Altitude max | 1000 m |
| Color | Dark grey RAL 7035 |
| Remote controls | EPO and bypass |
| Safety compliance | EN 62040-1 |
| EMC conformance | EN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3 |
| Protection rating | 3 |
| Line-Interactive/Smart Active efficiency | up to 98,5% |
| Noise | 63 dBA at 1 m |
| Remote signals | voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA) |
| Operating temperature | 0 ÷ 40 °C |
| Relative humidity | 95% no condensing |
| DATA | |
| Weight | 800 Kg |
| Dimensions (h w d) | 1900x1000x850 mm |
MHT 200
| Models | MHT 200 |
|---|---|
| INPUT | |
| Rated power | 200000 VA |
| Voltage | 400 Vac three-phase Vac |
| Voltage tolerance | + 20% – 25% |
| Frequency | 50/60 Hz with autorange |
| Frequency tolerance | 45/65 Hz |
| Power factor | 0,99 |
| Input current | 281 A |
| Current distorsion | <3% |
| Soft start | 0-100% in 10 |
| BY PASS | |
| Rated voltage | 400 Vac three-phase selectable 380 and 415 |
| Voltage tolerance | ± 15% (selectable from ± 10% to ± 25% from front panel) |
| Rated frequency | 50/60 Hz (autorange) |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Rated current | 281 A |
| Number phases | 3 |
| Back-feed protection | yes |
| Overload capacity Inx10ms | 14 |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 200000 VA |
| Active power | 180000 W |
| Number phases | 3 + N |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinewave |
| Dynamic stability | ± 5% in 5 ms |
| Frequency | same as the input (autorange) |
| Voltage distortion with distorcing load | <3% |
| Voltage distortion with linear load | <1% |
| Frequency stability | ± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present |
| Overload | 110 % 125% 150% 200% of the rated current for 10′ / 1′ / 7 |
| RECTIFIER OUTPUT | |
| Ripple | <1% |
| BATTERIES | |
| Type | Maintenance-free sealed lead-acid |
| Maximum recharge current | 0.2xC10 |
| ENVIRONMENTAL | |
| Altitude max | 1000 m |
| Color | Dark grey RAL 7035 |
| Remote controls | EPO and bypass |
| Safety compliance | EN 62040-1 |
| EMC conformance | EN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3 |
| Protection rating | 3 |
| Line-Interactive/Smart Active efficiency | up to 98,5% |
| Noise | 63 dBA at 1 m |
| Remote signals | voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA) |
| Operating temperature | 0 ÷ 40 °C |
| Relative humidity | 95% no condensing |
| DATA | |
| Weight | 910 Kg |
| Dimensions (h w d) | 1900x1000x850 mm |
MHT 250
| Models | MHT 250 |
|---|---|
| INPUT | |
| Rated power | 250000 VA |
| Voltage | 400 Vac three-phase Vac |
| Voltage tolerance | + 20% – 25% |
| Frequency | 50/60 Hz with autorange |
| Frequency tolerance | 45/65 Hz |
| Power factor | 0,99 |
| Input current | 352 A |
| Current distorsion | <3% |
| Soft start | 0-100% in 10 |
| BY PASS | |
| Rated voltage | 400 Vac three-phase selectable 380 and 415 |
| Voltage tolerance | ± 15% (selectable from ± 10% to ± 25% from front panel) |
| Rated frequency | 50/60 Hz (autorange) |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Rated current | 352 A |
| Number phases | 3 |
| Back-feed protection | yes |
| Overload capacity Inx10ms | 14 |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 250000 VA |
| Active power | 225000 W |
| Number phases | 3 + N |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinewave |
| Dynamic stability | ± 5% in 5 ms |
| Frequency | same as the input (autorange) |
| Voltage distortion with distorcing load | <3% |
| Voltage distortion with linear load | <1% |
| Frequency stability | ± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present |
| Inverter efficiency at rated load | 95 % |
| Overload | 110 % 125% 150% 200% of the rated current for 10′ / 1′ / 7 |
| RECTIFIER OUTPUT | |
| Ripple | <1% |
| BATTERIES | |
| Type | Maintenance-free sealed lead-acid |
| Maximum recharge current | 0.2xC10 |
| ENVIRONMENTAL | |
| Altitude max | 1000 m |
| Color | Dark grey RAL 7035 |
| Remote controls | EPO and bypass |
| Safety compliance | EN 62040-1 |
| EMC conformance | EN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3 |
| Protection rating | 3 |
| Line-Interactive/Smart Active efficiency | up to 98,5% |
| Noise | 63 dBA at 1 m |
| Remote signals | voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA) |
| Operating temperature | 0 ÷ 40 °C |
| Relative humidity | 95% no condensing |
| DATA | |
| Weight | 1000 Kg |
| Dimensions (h w d) | 1900x1000x850 mm |
MHT 300
| Models | MHT 300 |
|---|---|
| INPUT | |
| Rated power | 300000 VA |
| Voltage | 400 Vac three-phase Vac |
| Voltage tolerance | + 20% – 25% |
| Frequency | 50/60 Hz with autorange |
| Frequency tolerance | 45/65 Hz |
| Power factor | 0,99 |
| Input current | 423 A |
| Current distorsion | <3% |
| Soft start | 0-100% in 10 |
| BY PASS | |
| Rated voltage | 400 Vac three-phase selectable 380 and 415 |
| Voltage tolerance | ± 15% (selectable from ± 10% to ± 25% from front panel) |
| Rated frequency | 50/60 Hz (autorange) |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Rated current | 423 A |
| Number phases | 3 |
| Back-feed protection | yes |
| Overload capacity Inx10ms | 14 |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 300000 VA |
| Active power | 270000 W |
| Number phases | 3 + N |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinewave |
| Dynamic stability | ± 5% in 5 ms |
| Frequency | same as the input (autorange) |
| Voltage distortion with distorcing load | <3% |
| Voltage distortion with linear load | <1% |
| Frequency stability | ± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present |
| Inverter efficiency at rated load | 95 % |
| Overload | 110 % 125% 150% 200% of the rated current for 10′ / 1′ / 7 |
| RECTIFIER OUTPUT | |
| Ripple | <1% |
| BATTERIES | |
| Type | Maintenance-free sealed lead-acid |
| Maximum recharge current | 0.2xC10 |
| ENVIRONMENTAL | |
| Altitude max | 1000 m |
| Color | Dark grey RAL 7035 |
| Remote controls | EPO and bypass |
| Safety compliance | EN 62040-1 |
| EMC conformance | EN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3 |
| Protection rating | 3 |
| Line-Interactive/Smart Active efficiency | up to 98,5% |
| Noise | 70÷72 dBA at 1 m |
| Remote signals | voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA) |
| Operating temperature | 0 ÷ 40 °C |
| Relative humidity | 95% no condensing |
| DATA | |
| Weight | 1400 Kg |
| Dimensions (h w d) | 1900x1500x1000 mm |
MHT 400
| Models | MHT 400 |
|---|---|
| INPUT | |
| Rated power | 400000 VA |
| Voltage | 400 Vac three-phase Vac |
| Voltage tolerance | + 20% – 25% |
| Frequency | 50/60 Hz with autorange |
| Frequency tolerance | 45/65 Hz |
| Power factor | 0,99 |
| Input current | 564 A |
| Current distorsion | <3% |
| Soft start | 0-100% in 10 |
| BY PASS | |
| Rated voltage | 400 Vac three-phase selectable 380 and 415 |
| Voltage tolerance | ± 15% (selectable from ± 10% to ± 25% from front panel) |
| Rated frequency | 50/60 Hz (autorange) |
| Frequency tolerance | ± 2% (selectable from ± 1% to ± 5% from front panel) |
| Rated current | 564 A |
| Number phases | 3 |
| Back-feed protection | yes |
| Overload capacity Inx10ms | 14 |
| OUTPUT and INVERTER OUTPUT | |
| Rated power | 400000 VA |
| Active power | 360000 W |
| Number phases | 3 + N |
| Crest factor (Ipeak/Irms) | 3 : 1 |
| Waveform | Sinewave |
| Dynamic stability | ± 5% in 5 ms |
| Frequency | same as the input (autorange) |
| Voltage distortion with distorcing load | <3% |
| Voltage distortion with linear load | <1% |
| Frequency stability | ± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present |
| Inverter efficiency at rated load | 95 % |
| Overload | 110 % 125% 150% 200% of the rated current for 10′ / 1′ / 7 |
| RECTIFIER OUTPUT | |
| Ripple | <1% |
| BATTERIES | |
| Type | Maintenance-free sealed lead-acid |
| Maximum recharge current | 0.2xC10 |
| ENVIRONMENTAL | |
| Altitude max | 1000 m |
| Color | Dark grey RAL 7035 |
| Remote controls | EPO and bypass |
| Safety compliance | EN 62040-1 |
| EMC conformance | EN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3 |
| Protection rating | 3 |
| Line-Interactive/Smart Active efficiency | up to 98,5% |
| Noise | 70÷72 dBA at 1 m |
| Remote signals | voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA) |
| Operating temperature | 0 ÷ 40 °C |
| Relative humidity | 95% no condensing |
| DATA | |
| Weight | 1700 Kg |
| Dimensions (h w d) | 1900x1500x1000 mm |