Riello Master HP UL (UPS systeem)

Topprestaties en bescherming

De ongelooflijke niveau van kwaliteit, betrouwbaarheid en energiebesparing die door de Master HP aangeboden wordt van UPS zijn uitgebreid tot een 480 Vac omvatten - 60 Hz versie, gecertificeerd als UL, met vermogens 65-250 kVA. IT-afdeling managers, facility managers en CTO's staan onder toenemende druk om zero downtime te bereiken en op maat datacenter of industriële installaties flexibel in het gezicht van de voortdurende veranderingen en expansie te krijgen. Als het zoeken naar de meest betrouwbare en efficiënte stroomvoorziening wordt steeds meer kritiek, is Riello UPS voortdurend te investeren in energie-oplossingen aan de eisen van een aantal van onze klanten te voldoen; een verbintenis die resulteerde in de Master HP UL bereik. Meer dan alleen een innovatieve en technologisch geavanceerde UPS, het is een sprong in de toekomst van de drie-fase-technologie. Dankzij de dubbele conversie on-line-techniek is die volledig gebaseerd op IGBT en digitale signaalverwerking (DSP), de Master HP UL aanbod zorgt voor een maximale bescherming van voeding en kwaliteit voor elk type lading, IT of industrieel, in het bijzonder voor bedrijfskritische applicaties, met VFI SS 111 classificatie (spanning en frequentie Independent) in overeenstemming met de IEC EN 62040-3. Deze serie is ontworpen met behulp van een nieuwe configuratie die een IGBT sinusvormige gelijkrichter ingang in plaats van de conventionele thyristor systeem omvat. Anders dan andere UPS-technologie op de markt dubbele conversie galvanisch gescheiden uitgang garandeert kwaliteit voeding die volledig beschermd tegen elektrische afwijkingen aan de ingang. Zelfs in het geval van ernstige problemen met de voeding, blijft het uitgangsvermogen stabiel.

Kenmerken

Zero effect bron

Master HP UL beschikt over de extra voordelen van de Zero Impact Bron formule aangeboden door een IGBT-gebaseerde gelijkrichter montage. Dit elimineert problemen in verband met de installatie in netwerken met een beperkte macht, indien de UPS wordt geleverd door een generator of in ieder geval waar er problemen zijn met de compatibiliteit belastingen die de huidige harmonische genereren. Master HP UL heeft nul invloed op de voedingsbron of het nu een stroomnet of een generator set:

– Ingangsstroom vervorming <3%
– Input power factor 0,99
– Power walk-in functie die zorgt voor het opstarten van de progressieve gelijkrichter
– Startup vertragingsfunctie, om de gelijkrichters opnieuw op te starten wanneer de stroom wordt hersteld als er meerdere UPS in het systeem zijn.



Master HP UL vervult de rol van een filter en vermogensfactor corrector, beschermt de stroomopwaartse stroomtoevoer vanuit harmonische en blindvermogen, gegenereerd door de consument.

MHT UL 65

Models MHT UL 65
INPUT
Voltage 480 Vac three-phase + N Vac
Frequency 45 ÷ 65 Hz
Frequency tolerance +/- 2% (selectable from +/- 1% to +/- 5% from front panel)
Power factor > 0,99
Current distorsion <3% THDi
Soft start 0 ÷ 100% in 30″ (selectable)
OUTPUT and INVERTER OUTPUT
Rated power 65000 VA
Active power 58500 W
Number phases 3 + N
Crest factor (Ipeak/Irms) 3:1 Ipeack/Irms
Waveform Sinusoidal
Static stability +/- 1%
Dynamic stability from +/- 5% to +/- 1% in 20 ms
Frequency 60 Hz
Frequency stability 0,05%
RECTIFIER OUTPUT
Ripple Zero
OVERLOAD TIMES
100% < Load < 110% 60′
100% < Load < 120% 10′
Load = 150% 1′
BATTERIES
Type VRLA AGM; GEL; NiCd; Li-ion; Supercaps e Flyweel
ENVIRONMENTAL
Color Dark grey RAL 7016
Remote controls ESD e bypass (configurable)
Communication Double RS232 + dry contacts + 2 slots for communication interfaces
Protection rating IP20 (others on request)
Marks UL
Other compliances UL Standard 1778: II edition from 65 to 125 kVA, IV edition from 160 to 250 kVA; National Electrical Code (NFPA-70); NEMA PE-1; CUL – CSA C22.2; ASME; ASA-C-39.1-1984; FCC part 15 subpart J class A; NEC; OSHA; IEEE 587; ANSI C 62.41-1980; ISO 9000
Line-Interactive/Smart Active efficiency up to 98.5%
Noise 65 dBA
Remote signals dry contact (configurable)
Operating temperature 0 °C / + 40 °C
Relative humidity <95% non-condensing
Transfer typology transpallet
DATA
Weight 1213 lbs [550] Kg
Dimensions (h w d) 1900 x 800 x 850 mm

MHT UL 80

Models MHT UL 80
INPUT
Voltage 480 Vac three-phase + N Vac
Frequency 45 ÷ 65 Hz
Frequency tolerance +/- 2% (selectable from +/- 1% to +/- 5% from front panel)
Power factor > 0,99
Current distorsion <3% THDi
Soft start 0 ÷ 100% in 30″ (selectable)
OUTPUT and INVERTER OUTPUT
Rated power 80000 VA
Active power 72000 W
Number phases 3 + N
Crest factor (Ipeak/Irms) 3:1 Ipeack/Irms
Waveform Sinusoidal
Static stability +/- 1%
Dynamic stability from +/- 5% to +/- 1% in 20 ms
Frequency 60 Hz
Frequency stability 0,05%
RECTIFIER OUTPUT
Ripple Zero
OVERLOAD TIMES
100% < Load < 110% 60′
100% < Load < 120% 10′
Load = 150% 1′
BATTERIES
Type VRLA AGM; GEL; NiCd; Li-ion; Supercaps e Flyweel
ENVIRONMENTAL
Color Dark grey RAL 7016
Remote controls ESD e bypass (configurable)
Communication Double RS232 + dry contacts + 2 slots for communication interfaces
Protection rating IP20 (others on request)
Marks UL
Other compliances UL Standard 1778: II edition from 65 to 125 kVA, IV edition from 160 to 250 kVA; National Electrical Code (NFPA-70); NEMA PE-1; CUL – CSA C22.2; ASME; ASA-C-39.1-1984; FCC part 15 subpart J class A; NEC; OSHA; IEEE 587; ANSI C 62.41-1980; ISO 9000
Line-Interactive/Smart Active efficiency up to 98.5%
Noise 65 dBA
Remote signals dry contact (configurable)
Operating temperature 0 °C / + 40 °C
Relative humidity <95% non-condensing
Transfer typology transpallet
DATA
Weight 1213 lbs [550] Kg
Dimensions (h w d) 1900 x 800 x 850 mm

MHT UL 100

Models MHT UL 100
INPUT
Voltage 480 Vac three-phase + N Vac
Frequency 45 ÷ 65 Hz
Frequency tolerance +/- 2% (selectable from +/- 1% to +/- 5% from front panel)
Power factor > 0,99
Current distorsion <3% THDi
Soft start 0 ÷ 100% in 30″ (selectable)
OUTPUT and INVERTER OUTPUT
Rated power 100000 VA
Active power 90000 W
Number phases 3 + N
Crest factor (Ipeak/Irms) 3:1 Ipeack/Irms
Waveform Sinusoidal
Static stability +/- 1%
Dynamic stability from +/- 5% to +/- 1% in 20 ms
Frequency 60 Hz
Frequency stability 0,05%
RECTIFIER OUTPUT
Ripple Zero
OVERLOAD TIMES
100% < Load < 110% 60′
100% < Load < 120% 10′
Load = 150% 1′
BATTERIES
Type VRLA AGM; GEL; NiCd; Li-ion; Supercaps e Flyweel
ENVIRONMENTAL
Color Dark grey RAL 7016
Remote controls ESD e bypass (configurable)
Communication Double RS232 + dry contacts + 2 slots for communication interfaces
Protection rating IP20 (others on request)
Marks UL
Other compliances UL Standard 1778: II edition from 65 to 125 kVA, IV edition from 160 to 250 kVA; National Electrical Code (NFPA-70); NEMA PE-1; CUL – CSA C22.2; ASME; ASA-C-39.1-1984; FCC part 15 subpart J class A; NEC; OSHA; IEEE 587; ANSI C 62.41-1980; ISO 9000
Line-Interactive/Smart Active efficiency up to 98.5%
Noise 65 dBA
Remote signals dry contact (configurable)
Operating temperature 0 °C / + 40 °C
Relative humidity <95% non-condensing
Transfer typology transpallet
DATA
Weight 1610 [730] Kg
Dimensions (h w d) 1900 x 800 x 850 mm

MHT UL 125

Models MHT UL 125
INPUT
Voltage 480 Vac three-phase + N Vac
Frequency 45 ÷ 65 Hz
Frequency tolerance +/- 2% (selectable from +/- 1% to +/- 5% from front panel)
Power factor > 0,99
Current distorsion <3% THDi
Soft start 0 ÷ 100% in 30″ (selectable)
OUTPUT and INVERTER OUTPUT
Rated power 125000 VA
Active power 112500 W
Number phases 3 + N
Crest factor (Ipeak/Irms) 3:1 Ipeack/Irms
Waveform Sinusoidal
Static stability +/- 1%
Dynamic stability from +/- 5% to +/- 1% in 20 ms
Frequency 60 Hz
Frequency stability 0,05%
RECTIFIER OUTPUT
Ripple Zero
OVERLOAD TIMES
100% < Load < 110% 60′
100% < Load < 120% 10′
Load = 150% 1′
BATTERIES
Type VRLA AGM; GEL; NiCd; Li-ion; Supercaps e Flyweel
ENVIRONMENTAL
Color Dark grey RAL 7016
Remote controls ESD e bypass (configurable)
Communication Double RS232 + dry contacts + 2 slots for communication interfaces
Protection rating IP20 (others on request)
Marks UL
Other compliances UL Standard 1778: II edition from 65 to 125 kVA, IV edition from 160 to 250 kVA; National Electrical Code (NFPA-70); NEMA PE-1; CUL – CSA C22.2; ASME; ASA-C-39.1-1984; FCC part 15 subpart J class A; NEC; OSHA; IEEE 587; ANSI C 62.41-1980; ISO 9000
Line-Interactive/Smart Active efficiency up to 98.5%
Noise 68 dBA
Remote signals dry contact (configurable)
Operating temperature 0 °C / + 40 °C
Relative humidity <95% non-condensing
Transfer typology transpallet
DATA
Weight 1742 lbs [720] Kg
Dimensions (h w d) 1900 x 800 x 850 mm

MHT UL 160

Models MHT UL 160
INPUT
Voltage 480 Vac three-phase + N Vac
Frequency 45 ÷ 65 Hz
Frequency tolerance +/- 2% (selectable from +/- 1% to +/- 5% from front panel)
Power factor > 0,99
Current distorsion <3% THDi
Soft start 0 ÷ 100% in 30″ (selectable)
OUTPUT and INVERTER OUTPUT
Rated power 160000 VA
Active power 144000 W
Number phases 3 + N
Crest factor (Ipeak/Irms) 3:1 Ipeack/Irms
Waveform Sinusoidal
Static stability +/- 1%
Dynamic stability from +/- 5% to +/- 1% in 20 ms
Frequency 60 Hz
Frequency stability 0,05%
RECTIFIER OUTPUT
Ripple Zero
OVERLOAD TIMES
100% < Load < 110% 60′
100% < Load < 120% 10′
Load = 150% 1′
BATTERIES
Type VRLA AGM; GEL; NiCd; Li-ion; Supercaps e Flyweel
ENVIRONMENTAL
Color Dark grey RAL 7016
Remote controls ESD e bypass (configurable)
Communication Double RS232 + dry contacts + 2 slots for communication interfaces
Protection rating IP20 (others on request)
Marks UL
Other compliances UL Standard 1778: II edition from 65 to 125 kVA, IV edition from 160 to 250 kVA; National Electrical Code (NFPA-70); NEMA PE-1; CUL – CSA C22.2; ASME; ASA-C-39.1-1984; FCC part 15 subpart J class A; NEC; OSHA; IEEE 587; ANSI C 62.41-1980; ISO 9000
Line-Interactive/Smart Active efficiency up to 98.5%
Noise 68 dBA
Remote signals dry contact (configurable)
Operating temperature 0 °C / + 40 °C
Relative humidity <95% non-condensing
Transfer typology transpallet
DATA
Weight 1851 lbs [840] Kg
Dimensions (h w d) 1900x1400x850 mm

MHT UL 250

Models MHT UL 250
INPUT
Voltage 480 Vac three-phase + N Vac
Frequency 45 ÷ 65 Hz
Frequency tolerance +/- 2% (selectable from +/- 1% to +/- 5% from front panel)
Power factor > 0,99
Current distorsion <3% THDi
Soft start 0 ÷ 100% in 30″ (selectable)
OUTPUT and INVERTER OUTPUT
Rated power 250000 VA
Active power 225000 W
Number phases 3 + N
Crest factor (Ipeak/Irms) 3:1 Ipeack/Irms
Waveform Sinusoidal
Static stability +/- 1%
Dynamic stability from +/- 5% to +/- 1% in 20 ms
Frequency 60 Hz
Frequency stability 0,05%
RECTIFIER OUTPUT
Ripple Zero
OVERLOAD TIMES
100% < Load < 110% 60′
100% < Load < 120% 10′
Load = 150% 1′
BATTERIES
Type VRLA AGM; GEL; NiCd; Li-ion; Supercaps e Flyweel
ENVIRONMENTAL
Color Dark grey RAL 7016
Remote controls ESD e bypass (configurable)
Communication Double RS232 + dry contacts + 2 slots for communication interfaces
Protection rating IP20 (others on request)
Marks UL
Other compliances UL Standard 1778: II edition from 65 to 125 kVA, IV edition from 160 to 250 kVA; National Electrical Code (NFPA-70); NEMA PE-1; CUL – CSA C22.2; ASME; ASA-C-39.1-1984; FCC part 15 subpart J class A; NEC; OSHA; IEEE 587; ANSI C 62.41-1980; ISO 9000
Line-Interactive/Smart Active efficiency up to 98.5%
Noise 68 dBA
Remote signals dry contact (configurable)
Operating temperature 0 °C / + 40 °C
Relative humidity <95% non-condensing
Transfer typology transpallet
DATA
Weight 2247 lbs [1110] Kg
Dimensions (h w d) 1900x1400x850 mm

MHT UL 200

Models MHT UL 200
INPUT
Voltage 480 Vac three-phase + N Vac
Frequency 45 ÷ 65 Hz
Frequency tolerance +/- 2% (selectable from +/- 1% to +/- 5% from front panel)
Power factor > 0,99
Current distorsion <3% THDi
Soft start 0 ÷ 100% in 30″ (selectable)
OUTPUT and INVERTER OUTPUT
Rated power 200000 VA
Active power 180000 W
Number phases 3 + N
Crest factor (Ipeak/Irms) 3:1 Ipeack/Irms
Waveform Sinusoidal
Static stability +/- 1%
Dynamic stability from +/- 5% to +/- 1% in 20 ms
Frequency 60 Hz
Frequency stability 0,05%
RECTIFIER OUTPUT
Ripple Zero
OVERLOAD TIMES
100% < Load < 110% 60′
100% < Load < 120% 10′
Load = 150% 1′
BATTERIES
Type VRLA AGM; GEL; NiCd; Li-ion; Supercaps e Flyweel
ENVIRONMENTAL
Color Dark grey RAL 7016
Remote controls ESD e bypass (configurable)
Communication Double RS232 + dry contacts + 2 slots for communication interfaces
Protection rating IP20 (others on request)
Marks UL
Other compliances UL Standard 1778: II edition from 65 to 125 kVA, IV edition from 160 to 250 kVA; National Electrical Code (NFPA-70); NEMA PE-1; CUL – CSA C22.2; ASME; ASA-C-39.1-1984; FCC part 15 subpart J class A; NEC; OSHA; IEEE 587; ANSI C 62.41-1980; ISO 9000
Line-Interactive/Smart Active efficiency up to 98.5%
Noise 68 dBA
Remote signals dry contact (configurable)
Operating temperature 0 °C / + 40 °C
Relative humidity <95% non-condensing
Transfer typology transpallet
DATA
Weight 2138 lbs [970] Kg
Dimensions (h w d) 1900x1400x850 mm