Riello Master HE (UPS systeem)

99,4% rendement

kVA / kW

Master HE-serie is beschikbaar in 100-800 kVA. De UPS zijn voorzien van een nieuwe on-line dubbele conversie technologie gebruik te maken van IGBT en DSP (Digital Signal Processor) controle om maximale bescherming, power quality en groene energie voor alle soorten toepassingen, waaronder primaire data centers, ramp recovery sites, telecom kamers, industriële bieden processen en beveiligingstoepassingen.

Hoog rendement staat voor hogere actief vermogen beschikbaar als vergelijking met oudere UPS systemen, dankzij uitgang unitaire pf nominaal vermogen wordt verleend zonder onafhankelijk terugzetting van de bedrijfstemperatuur.

Kenmerken

Zero effect bron

Master HE heeft geen invloed op aangesloten stroombronnen – net netwerken of generatoren: ≤ 3% ingangsstroom vervorming.

– Input power factor 0,99
– Macht walk-in functie : om een progressieve gelijkrichter startup te verzekeren
– Startup vertraging functie : om de gelijkrichter opnieuw op te starten wanneer de netvoeding hersteld is.


Batterij zorgsysteem

Master HE-serie UPS zijn voorzien van een scala aan functies die zijn ontworpen om de batterij te verlengen en het gebruik ervan te verminderen.

Output scheidingstransformator

– Betere bescherming van de lading van DC / batterij problemen
– De UPS kan worden geleverd door twee onafhankelijke lijnen
– Storing op de DC-bus heeft geen invloed op de bypass beschikbaarheid
– Hoge Korte circuitstroom
– Hogere immuniteit voor harmonische of energie back feed, gegenereerd door de belasting.



MHE 100

ModelsMHE 100
INPUT
Rated power100000 VA
Voltage400 Vac three-phase Vac
Voltage tolerance+ 20% – 25%
Frequency50/60 Hz with autorange
Frequency tolerance45/65 Hz
Power factor0,99
Input current141 A
Current distorsion<3%
Soft start0-100% in 10
BY PASS
Rated voltage400 Vac three-phase selectable 380 and 415
Voltage tolerance± 15% (selectable from ± 10% to ± 25% from front panel)
Rated frequency50/60 Hz (autorange)
Frequency tolerance± 2% (selectable from ± 1% to ± 5% from front panel)
Rated current141 A
Number phases3
Back-feed protectionyes
Overload capacity Inx10ms14
OUTPUT and INVERTER OUTPUT
Rated power100000 VA
Active power100000 W
Number phases3 + N
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Dynamic stability± 5% in 5 ms
Frequencysame as the input (autorange)
Voltage distortion with distorcing load<3%
Voltage distortion with linear load<1%
Frequency stability± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present
Overload110% 125% 150% 200% of the rated current for 10′ / 1′ / 7
RECTIFIER OUTPUT
Ripple<1%
BATTERIES
TypeMaintenance-free sealed lead-acid
Maximum recharge current0.2xC10
ENVIRONMENTAL
Altitude max1000 m
ColorDark grey RAL 7035
Remote controlsEPO and bypass
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3
Protection rating3
Line-Interactive/Smart Active efficiencyup to 99,4%
Noise63 dBA at 1 m
Remote signalsvoltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight730 Kg
Dimensions (h w d)1900x800x850 mm

MHE 120

ModelsMHE 120
INPUT
Rated power120000 VA
Voltage400 Vac three-phase Vac
Voltage tolerance+ 20% – 25%
Frequency50/60 Hz with autorange
Frequency tolerance45/65 Hz
Power factor0,99
Input current169 A
Current distorsion<3%
Soft start0-100% in 10
BY PASS
Rated voltage400 Vac three-phase selectable 380 and 415
Voltage tolerance± 15% (selectable from ± 10% to ± 25% from front panel)
Rated frequency50/60 Hz (autorange)
Frequency tolerance± 2% (selectable from ± 1% to ± 5% from front panel)
Rated current169 A
Number phases3
Back-feed protectionyes
Overload capacity Inx10ms14
OUTPUT and INVERTER OUTPUT
Rated power120000 VA
Active power120000 W
Number phases3 + N
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Dynamic stability± 5% in 5 ms
Frequencysame as the input (autorange)
Voltage distortion with distorcing load<3%
Voltage distortion with linear load<1%
Frequency stability± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present
Overload110% 125% 150% 200% of the rated current for 10′ / 1′ / 7
RECTIFIER OUTPUT
Ripple<1%
BATTERIES
TypeMaintenance-free sealed lead-acid
Maximum recharge current0.2xC10
ENVIRONMENTAL
Altitude max1000 m
ColorDark grey RAL 7035
Remote controlsEPO and bypass
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3
Protection rating3
Line-Interactive/Smart Active efficiencyup to 99,4%
Noise63 dBA at 1 m
Remote signalsvoltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight785 Kg
Dimensions (h w d)1900x800x850 mm

MHE 160

ModelsMHE 160
INPUT
Rated power160000 VA
Voltage400 Vac three-phase Vac
Voltage tolerance+ 20% – 25%
Frequency50/60 Hz with autorange
Frequency tolerance45/65 Hz
Power factor0,99
Input current226 A
Current distorsion<3%
Soft start0-100% in 10
BY PASS
Rated voltage400 Vac three-phase selectable 380 and 415
Voltage tolerance± 15% (selectable from ± 10% to ± 25% from front panel)
Rated frequency50/60 Hz (autorange)
Frequency tolerance± 2% (selectable from ± 1% to ± 5% from front panel)
Rated current226 A
Number phases3
Back-feed protectionyes
Overload capacity Inx10ms14
OUTPUT and INVERTER OUTPUT
Rated power160000 VA
Active power160000 W
Number phases3 + N
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Dynamic stability± 5% in 5 ms
Frequencysame as the input (autorange)
Voltage distortion with distorcing load<3%
Voltage distortion with linear load<1%
Frequency stability± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present
Overload110% 125% 150% 200% of the rated current for 10′ / 1′ / 7
RECTIFIER OUTPUT
Ripple<1%
BATTERIES
TypeMaintenance-free sealed lead-acid
Maximum recharge current0.2xC10
ENVIRONMENTAL
Altitude max1000 m
ColorDark grey RAL 7035
Remote controlsEPO and bypass
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3
Protection rating3
Line-Interactive/Smart Active efficiencyup to 99,4%
Noise63 dBA at 1 m
Remote signalsvoltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight865 Kg
Dimensions (h w d)1900x1000x850 mm

MHE 200

ModelsMHE 200
INPUT
Rated power200000 VA
Voltage400 Vac three-phase Vac
Voltage tolerance+ 20% – 25%
Frequency50/60 Hz with autorange
Frequency tolerance45/65 Hz
Power factor0,99
Input current281 A
Current distorsion<3%
Soft start0-100% in 10
BY PASS
Rated voltage400 Vac three-phase selectable 380 and 415
Voltage tolerance± 15% (selectable from ± 10% to ± 25% from front panel)
Rated frequency50/60 Hz (autorange)
Frequency tolerance± 2% (selectable from ± 1% to ± 5% from front panel)
Rated current281 A
Number phases3
Back-feed protectionyes
Overload capacity Inx10ms14
OUTPUT and INVERTER OUTPUT
Rated power200000 VA
Active power200000 W
Number phases3 + N
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Dynamic stability± 5% in 5 ms
Frequencysame as the input (autorange)
Voltage distortion with distorcing load<3%
Voltage distortion with linear load<1%
Frequency stability± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present
Overload110% 125% 150% 200% of the rated current for 10′ / 1′ / 7
RECTIFIER OUTPUT
Ripple<1%
BATTERIES
TypeMaintenance-free sealed lead-acid
Maximum recharge current0.2xC10
ENVIRONMENTAL
Altitude max1000 m
ColorDark grey RAL 7035
Remote controlsEPO and bypass
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3
Protection rating3
Line-Interactive/Smart Active efficiencyup to 99,4%
Noise63 dBA at 1 m
Remote signalsvoltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight910 Kg
Dimensions (h w d)1900x1000x850 mm

MHE 250

ModelsMHE 250
INPUT
Rated power250000 VA
Voltage400 Vac three-phase Vac
Voltage tolerance+ 20% – 25%
Frequency50/60 Hz with autorange
Frequency tolerance45/65 Hz
Power factor0,99
Input current352 A
Current distorsion<3%
Soft start0-100% in 10
BY PASS
Rated voltage400 Vac three-phase selectable 380 and 415
Voltage tolerance± 15% (selectable from ± 10% to ± 25% from front panel)
Rated frequency50/60 Hz (autorange)
Frequency tolerance± 2% (selectable from ± 1% to ± 5% from front panel)
Rated current352 A
Number phases3
Back-feed protectionyes
Overload capacity Inx10ms14
OUTPUT and INVERTER OUTPUT
Rated power250000 VA
Active power250000 W
Number phases3 + N
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Dynamic stability± 5% in 5 ms
Frequencysame as the input (autorange)
Voltage distortion with distorcing load<3%
Voltage distortion with linear load<1%
Frequency stability± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present
Overload125% 150% 200% of the rated current for 10′ / 1′ / 7
RECTIFIER OUTPUT
Ripple<1%
BATTERIES
TypeMaintenance-free sealed lead-acid
Maximum recharge current0.2xC10
ENVIRONMENTAL
Altitude max1000 m
ColorDark grey RAL 7035
Remote controlsEPO and bypass
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3
Protection rating3
Line-Interactive/Smart Active efficiencyup to 99,4%
Noise70 dBA at 1 m
Remote signalsvoltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight1090 Kg
Dimensions (h w d)1900x1000x850 mm

MHE 300

ModelsMHE 300
INPUT
Rated power300000 VA
Voltage400 Vac three-phase Vac
Voltage tolerance+ 20% – 25%
Frequency50/60 Hz with autorange
Frequency tolerance45/65 Hz
Power factor0,99
Input current423 A
Current distorsion<3%
Soft start0-100% in 10
BY PASS
Rated voltage400 Vac three-phase selectable 380 and 415
Voltage tolerance± 15% (selectable from ± 10% to ± 25% from front panel)
Rated frequency50/60 Hz (autorange)
Frequency tolerance± 2% (selectable from ± 1% to ± 5% from front panel)
Rated current423 A
Number phases3
Back-feed protectionyes
Overload capacity Inx10ms14
OUTPUT and INVERTER OUTPUT
Rated power300000 VA
Active power300000 W
Number phases3 + N
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Dynamic stability± 5% in 5 ms
Frequencysame as the input (autorange)
Voltage distortion with distorcing load<3%
Voltage distortion with linear load<1%
Frequency stability± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present
Overload125% 150% 200% of the rated current for 10′ / 1′ / 7
RECTIFIER OUTPUT
Ripple<1%
BATTERIES
TypeMaintenance-free sealed lead-acid
Maximum recharge current0.2xC10
ENVIRONMENTAL
Altitude max1000 m
ColorDark grey RAL 7035
Remote controlsEPO and bypass
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3
Protection rating3
Line-Interactive/Smart Active efficiencyup to 99,4%
Noise63 dBA at 1 m
Remote signalsvoltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight1520 Kg
Dimensions (h w d)1900x1500x1000 mm

MHE 400

ModelsMHE 400
INPUT
Rated power400000 VA
Voltage400 Vac three-phase Vac
Voltage tolerance+ 20% – 25%
Frequency50/60 Hz with autorange
Frequency tolerance45/65 Hz
Power factor0,99
Input current564 A
Current distorsion<3%
Soft start0-100% in 10
BY PASS
Rated voltage400 Vac three-phase selectable 380 and 415
Voltage tolerance± 15% (selectable from ± 10% to ± 25% from front panel)
Rated frequency50/60 Hz (autorange)
Frequency tolerance± 2% (selectable from ± 1% to ± 5% from front panel)
Rated current564 A
Number phases3
Back-feed protectionyes
Overload capacity Inx10ms14
OUTPUT and INVERTER OUTPUT
Rated power400000 VA
Active power400000 W
Number phases3 + N
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Dynamic stability± 5% in 5 ms
Frequencysame as the input (autorange)
Voltage distortion with distorcing load<3%
Voltage distortion with linear load<1%
Frequency stability± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present
Overload125% 150% 200% of the rated current for 10′ / 1′ / 7
RECTIFIER OUTPUT
Ripple<1%
BATTERIES
TypeMaintenance-free sealed lead-acid
Maximum recharge current0.2xC10
ENVIRONMENTAL
Altitude max1000 m
ColorDark grey RAL 7035
Remote controlsEPO and bypass
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3
Protection rating3
Line-Interactive/Smart Active efficiencyup to 99,4%
Noise70 dBA at 1 m
Remote signalsvoltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight1670 Kg
Dimensions (h w d)1900x1500x1000 mm

MHE 500

ModelsMHE 500
INPUT
Rated power500000 VA
Voltage400 Vac three-phase Vac
Voltage tolerance+ 20% – 25%
Frequency50/60 Hz with autorange
Frequency tolerance45/65 Hz
Power factor0,99
Input current702 A
Current distorsion<3%
Soft start0-100% in 10
BY PASS
Rated voltage400 Vac three-phase selectable 380 and 415
Voltage tolerance± 15% (selectable from ± 10% to ± 25% from front panel)
Rated frequency50/60 Hz (autorange)
Frequency tolerance± 2% (selectable from ± 1% to ± 5% from front panel)
Rated current702 A
Number phases3
Back-feed protectionyes
Overload capacity Inx10ms14
OUTPUT and INVERTER OUTPUT
Rated power500000 VA
Active power500000 W
Number phases3 + N
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Dynamic stability± 5% in 5 ms
Frequencysame as the input (autorange)
Voltage distortion with distorcing load<3%
Voltage distortion with linear load<1%
Frequency stability± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present
Overload125% 150% 200% of the rated current for 10′ / 1′ / 7
RECTIFIER OUTPUT
Ripple<1%
BATTERIES
TypeMaintenance-free sealed lead-acid
Maximum recharge current0.2xC10
ENVIRONMENTAL
Altitude max1000 m
ColorDark grey RAL 7035
Remote controlsEPO and bypass
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3
Protection rating3
Line-Interactive/Smart Active efficiencyup to 99,4%
Noise70 dBA at 1 m
Remote signalsvoltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight2500 Kg
Dimensions (h w d)1900x2100x1000 mm

MHE 600

ModelsMHE 600
INPUT
Rated power600000 VA
Voltage400 Vac three-phase Vac
Voltage tolerance+ 20% – 25%
Frequency50/60 Hz with autorange
Frequency tolerance45/65 Hz
Power factor0,99
Input current842 A
Current distorsion<3%
Soft start0-100% in 10
BY PASS
Rated voltage400 Vac three-phase selectable 380 and 415
Voltage tolerance± 15% (selectable from ± 10% to ± 25% from front panel)
Rated frequency50/60 Hz (autorange)
Frequency tolerance± 2% (selectable from ± 1% to ± 5% from front panel)
Rated current842 A
Number phases3
Back-feed protectionyes
Overload capacity Inx10ms14
OUTPUT and INVERTER OUTPUT
Rated power600000 VA
Active power600000 W
Number phases3 + N
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Dynamic stability± 5% in 5 ms
Frequencysame as the input (autorange)
Voltage distortion with distorcing load<3%
Voltage distortion with linear load<1%
Frequency stability± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present
Overload125% 150% 200% of the rated current for 10′ / 1′ / 7
RECTIFIER OUTPUT
Ripple<1%
BATTERIES
TypeMaintenance-free sealed lead-acid
Maximum recharge current0.2xC10
ENVIRONMENTAL
Altitude max1000 m
ColorDark grey RAL 7035
Remote controlsEPO and bypass
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3
Protection rating3
Line-Interactive/Smart Active efficiencyup to 99,4%
Noise70 dBA at 1 m
Remote signalsvoltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight2830 Kg
Dimensions (h w d)1900x2100x1000 mm

MHE 800

ModelsMHE 800
INPUT
Rated power800000 VA
Voltage400 Vac three-phase Vac
Voltage tolerance+ 20% – 25%
Frequency50/60 Hz with autorange
Frequency tolerance45/65 Hz
Power factor0,99
Input current1122 A
Current distorsion<3%
Soft start0-100% in 10
BY PASS
Rated voltage400 Vac three-phase selectable 380 and 415
Voltage tolerance± 15% (selectable from ± 10% to ± 25% from front panel)
Rated frequency50/60 Hz (autorange)
Frequency tolerance± 2% (selectable from ± 1% to ± 5% from front panel)
Rated current1122 A
Number phases3
Back-feed protectionyes
Overload capacity Inx10ms14
OUTPUT and INVERTER OUTPUT
Rated power800000 VA
Active power800000 W
Number phases3 + N
Crest factor (Ipeak/Irms)3 : 1
WaveformSinewave
Dynamic stability± 5% in 5 ms
Frequencysame as the input (autorange)
Voltage distortion with distorcing load<3%
Voltage distortion with linear load<1%
Frequency stability± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present
Overload125% 150% 200% of the rated current for 10′ / 1′ / 7
RECTIFIER OUTPUT
Ripple<1%
BATTERIES
TypeMaintenance-free sealed lead-acid
Maximum recharge current0.2xC10
ENVIRONMENTAL
Altitude max1000 m
ColorDark grey RAL 7035
Remote controlsEPO and bypass
Safety complianceEN 62040-1
EMC conformanceEN 62040-2 Directives 73/23-93/68-89/336 EEC EN 62040-3
Protection rating3
Line-Interactive/Smart Active efficiencyup to 99,4%
Noise70 dBA at 1 m
Remote signalsvoltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)
Operating temperature0 ÷ 40 °C
Relative humidity95% no condensing
DATA
Weight3950 Kg
Dimensions (h w d)1900x3200x1000 mm