Sentinel Dual - High Power (UPS systeem)

De Sentinel dual (High Power) assortiment is verkrijgbaar in 3.3-4-5-6-8-10kVA eenfase modellen en 6.5-8-10kVA driefasige / eenfase-modellen, met on-line dubbele conversie (VFI) technologie. Het dialoogvenster dubbele bereik kan direct op de vloer worden geplaatst of gemonteerd in 19 "rackmount kasten, zoals de Multi Shelter bereik.

In termen van technologie, beschikt over (selecteerbaar Online, Economie en Smart Active modi), en diagnostiek zoals de digitale display, RS232 en USB-interfaces, netwerkadapterkaart optie en PowerShield³ software omvatten. SENTINEL DUAL (High Power) is gemakkelijk de beste oplossing voor het beschermen van "mission critical" toepassingen die de hoogste niveaus van betrouwbaarheid.

SENTINEL DUAL (High Power) is bij uitstek geschikt voor een hele reeks toepassingen van IT-beveiliging.

Sentinel Dual (High Power) heeft 2 jaar garantie.

Microsoft-certificering
De UPS en communicatie software is gecertificeerd door Microsoft laboratoria.

Kenmerken

Flexibele installatie en gebruik

  • De UPS kan worden geïnstalleerd als een staande toren of 19 “rackmount UPS. Het voorpaneel digitale weergave kan worden getrokken (met de sleutels meegeleverd) en geroteerd om de installatieformaat online;
  • laag geluidsniveau (<40dBA) dankzij de digitale PWM-gecontroleerde ventilatie systeem dat is de belasting en de temperatuur afhankelijk, en het gebruik van een omvormer met een hoge schakelfrequentie (> 20kHz, boven het hoorbare bereik). DIALOG Dual is geschikt voor installatie in een bevolkte omgeving.
  • Opties

  • On-line (VFI): de omvormer de bevoegdheden van de belasting continu;
  • Economie: de UPS bootst een Line Interactive (VI) UPS ondersteuning van de lading van de batterij af wanneer de netspanning uitvalt of fluctueert wild;
  • Smart Active: de UPS selecteert automatisch de vraag of om te werken in On-line (VFI) of Line Interactive (VI) modus, afhankelijk van de stabiliteit van de netspanning;
  • Emergency: de UPS ondersteunt alleen de last met zijn batterijen als het lichtnet uitvalt – geschikt voor noodverlichting;
  • Omzetting van de frequentie 50 of 60 Hz;
  • Output voltage selectie: 220-230-240Vac één fase of 380-400-415Vac driefasige;
  • Automatische herstart de netspanning terugkeert van het front paneel of PowerShield³ software;
  • Automatische uitgang vertraging wanneer de UPS wordt opgestart;
  • Automatische uitschakeling wanneer er geen lading aanwezig is;
  • Einde van de ontlading van de accu pre-alarm.
  • Kwaliteit voeding

  • Gefilterd, stabiele en betrouwbare spanning – On line dubbele conversie (VFI) technologie volgens EN50091-3, een met EMI filter;
  • Gegarandeerde kwaliteit van de uitvoer nog met typische verstorende IT laadt met kuif factoren van 3: 1;
  • Lage impact op het lichtnet als de UPS heeft een ingangsvermogen fabriek in de buurt van 1, met een sinusvormige ingangsstroom.
  • Zeer betrouwbaar

  • Volledig digitaal geregelde;
  • Ononderbroken automatische by-pass;
  • Het gebruik van IMS (Insulated Metallic Substrates) modules.
  • Geavanceerde diagnose

  • Status, metingen en alarmen beschikbaar zijn op de standaard display met achtergrondverlichting;
  • UPS kan digitaal worden bijgewerkt (knipperen upgraden).
  • Optimale Battery Management

  • Betrouwbare prestaties van de batterij (automatische en handmatige batterij tests);
  • Verlengde levensduur van de batterij te wijten aan de unieke Low Rimpelstroom Discharge (LRCD);
  • “Hot-swap” gebruiker vervangbare batterijen;
  • Uitschuifbare back-up tijd met behulp van extra batterij packs verlenging of laden;
  • Verhoogde rit door (zonder batterijen) op lichtnet breekt tot 40ms en voor schommelingen, variërend van 84 tot 276Vac.
  • Verbeterde elektrische prestaties

  • Input beschermd door zelfherstellende thermische schakelaar;
  • Back-voeding bescherming: om energie te voorkomen dat terug aan het net moet een storing optreedt;
  • Verhoogde kortsluitstroom op de by-pass;
  • Verhoogde overbelasting: 150% op omvormer ook zonder netspanning aanwezig;
  • Prestatie gegarandeerd bij temperaturen tot 40 ° C op korte termijn;
  • Handmatige schakelaar op by-pass.
  • SDL 3300

    Models SDL 3300
    INPUT
    Rated power 3300 VA
    Voltage 220-230-240 Vac
    Frequency 50/60 Hz ± 5 Hz
    Power factor >0.98
    Current distorsion ≤7%
    BY PASS
    Voltage tolerance 180÷264 Vac (selectable in Economy Mode and SMART ACTIVE Mode)
    Frequency tolerance Selected frequency ± 5% (user configurable)
    OUTPUT and INVERTER OUTPUT
    Rated power 3300 VA
    Active power 2300 W
    Number phases 1
    Crest factor (Ipeak/Irms) 3 : 1
    Waveform Sinewave
    Frequency 50/60 Hz selectable
    Voltage distortion with distorcing load <5%
    Voltage distortion with linear load <3%
    OVERLOAD TIMES
    100% < Load < 110% 1 min
    Load > 150% 0.5 s
    BATTERIES
    Typical recharge time 2÷4 h
    ENVIRONMENTAL
    Color Dark grey
    Safety compliance EN 62040-1 and Directive 73/23 EEC, 93/68 EEC
    EMC conformance EN 62040-2 cl.B and Directive 89/336 EEC, 92/31 EEC, 93/68 EEC
    Accessories provided 2 output supply cables 10 A; 1 plug IEC-16 A; software; serial cable; tools for mimic panel
    Protection rating 3
    Protections Overload – short-circuit – overvoltage – undervoltage – temperature – low battery
    Line-Interactive/Smart Active efficiency 98%
    Noise <40 dBA at 1 m
    Operating temperature 0 ÷ 40 °C
    Relative humidity <95% no condensing
    DATA
    Weight 38 Kg
    Dimensions (h w d) 455x175x520/175(4U)x483x520 mm

    SDL 4000

    Models SDL 4000
    INPUT
    Rated power 4000 VA
    Voltage 220-230-240 Vac
    Frequency 50/60 Hz ± 5 Hz
    Power factor >0.98
    Current distorsion ≤7%
    BY PASS
    Voltage tolerance 180÷264 Vac (selectable in Economy Mode and SMART ACTIVE Mode)
    Frequency tolerance Selected frequency ± 5% (user configurable)
    OUTPUT and INVERTER OUTPUT
    Rated power 4000 VA
    Active power 2400 W
    Number phases 1
    Crest factor (Ipeak/Irms) 3 : 1
    Waveform Sinewave
    Frequency 50/60 Hz selectable
    Voltage distortion with distorcing load <5%
    Voltage distortion with linear load <3%
    OVERLOAD TIMES
    100% < Load < 110% 1 min
    Load > 150% 0.5 s
    BATTERIES
    Typical recharge time 2÷4 h
    ENVIRONMENTAL
    Color Dark grey
    Safety compliance EN 62040-1 and Directive 73/23 EEC, 93/68 EEC
    EMC conformance EN 62040-2 cl.B and Directive 89/336 EEC, 92/31 EEC, 93/68 EEC
    Accessories provided 2 output supply cables 10 A; 1 plug IEC-16 A; software; serial cable; tools for mimic panel
    Protection rating 3
    Protections Overload – short-circuit – overvoltage – undervoltage – temperature – low battery
    Line-Interactive/Smart Active efficiency 98%
    Noise <40 dBA at 1 m
    Operating temperature 0 ÷ 40 °C
    Relative humidity <95% no condensing
    DATA
    Weight 40 Kg
    Dimensions (h w d) 455x175x520/175(4U)x483x520 mm

    SDL 5000

    Models SDL 5000
    INPUT
    Rated power 5000 VA
    Voltage 220-230-240 Vac
    Frequency 50/60 Hz ± 5 Hz
    Power factor >0.98
    Current distorsion ≤7%
    BY PASS
    Voltage tolerance 180÷264 Vac (selectable in Economy Mode and SMART ACTIVE Mode)
    Frequency tolerance Selected frequency ± 5% (user configurable)
    OUTPUT and INVERTER OUTPUT
    Rated power 5000 VA
    Active power 4500 W
    Number phases 1
    Crest factor (Ipeak/Irms) 3 : 1
    Waveform Sinewave
    Frequency 50/60 Hz selectable
    Voltage distortion with distorcing load <5%
    Voltage distortion with linear load <3%
    OVERLOAD TIMES
    100% < Load < 110% 1 min
    Load > 150% 0.5 s
    BATTERIES
    Typical recharge time 2÷4 h
    ENVIRONMENTAL
    Color Dark grey
    Safety compliance EN 62040-1 and Directive 73/23 EEC, 93/68 EEC
    EMC conformance EN 62040-2 cl. B and Directive 89/336/EEC, EN 62040-3 (capabilities)
    Accessories provided 2 output supply cables 10 A; 1 plug IEC-16 A; software; serial cable; tools for mimic panel
    Protection rating 3
    Protections Overload – short-circuit – overvoltage – undervoltage – temperature – low battery
    Line-Interactive/Smart Active efficiency 98%
    Noise <45 dBA at 1 m
    Operating temperature 0 ÷ 40 °C
    Relative humidity <95% no condensing
    DATA
    Weight 62 Kg
    Dimensions (h w d) 455x175x660/175(4U)x483x660 mm

    SDL 6000

    Models SDL 6000
    INPUT
    Rated power 6000 VA
    Voltage 220-230-240 Vac
    Frequency 50/60 Hz ± 5 Hz
    Power factor >0.98
    Current distorsion ≤5%
    BY PASS
    Voltage tolerance 180÷264 Vac (selectable in Economy Mode and SMART ACTIVE Mode)
    Frequency tolerance Selected frequency ± 5% (user configurable)
    OUTPUT and INVERTER OUTPUT
    Rated power 6000 VA
    Active power 5400 W
    Number phases 1
    Crest factor (Ipeak/Irms) 3 : 1
    Waveform Sinewave
    Frequency 50/60 Hz selectable
    Voltage distortion with distorcing load <5%
    Voltage distortion with linear load <3%
    OVERLOAD TIMES
    100% < Load < 110% 1 min
    Load > 150% 0.5 s
    BATTERIES
    Typical recharge time 2÷4 h
    ENVIRONMENTAL
    Color Dark grey
    Safety compliance EN 62040-1 and Directive 73/23 EEC, 93/68 EEC
    EMC conformance EN 62040-2 cl. B and Directive 89/336/EEC, EN 62040-3 (capabilities)
    Accessories provided 2 output supply cables 10 A; 1 plug IEC-16 A; software; serial cable; tools for mimic panel
    Protection rating 3
    Protections Overload – short-circuit – overvoltage – undervoltage – temperature – low battery
    Line-Interactive/Smart Active efficiency 98%
    Noise <45 dBA at 1 m
    Operating temperature 0 ÷ 40 °C
    Relative humidity <95% no condensing
    DATA
    Weight 64 Kg
    Dimensions (h w d) 455x175x660/175(4U)x483x660 mm

    SDL 8000

    Models SDL 8000
    INPUT
    Rated power 8000 VA
    Voltage 220-230-240 Vac
    Frequency 50/60 Hz ± 5 Hz
    Power factor >0.98
    Current distorsion ≤5%
    BY PASS
    Voltage tolerance 180÷264 Vac (selectable in Economy Mode and SMART ACTIVE Mode)
    Frequency tolerance Selected frequency ± 5% (user configurable)
    OUTPUT and INVERTER OUTPUT
    Rated power 8000 VA
    Active power 7200 W
    Number phases 1
    Crest factor (Ipeak/Irms) 3 : 1
    Waveform Sinewave
    Frequency 50/60 Hz selectable
    Voltage distortion with distorcing load <5%
    Voltage distortion with linear load <3%
    OVERLOAD TIMES
    100% < Load < 110% 1 min
    Load > 150% 0.5 s
    BATTERIES
    Typical recharge time 2÷4 h
    ENVIRONMENTAL
    Color Dark grey
    Safety compliance EN 62040-1 and Directive 73/23 EEC, 93/68 EEC
    EMC conformance EN 62040-2 cl. B and Directive 89/336/EEC, EN 62040-3 (capabilities)
    Accessories provided 2 output supply cables 10 A; 1 plug IEC-16 A; software; serial cable; tools for mimic panel
    Protection rating 3
    Protections Overload – short-circuit – overvoltage – undervoltage – temperature – low battery
    Line-Interactive/Smart Active efficiency 98%
    Noise <45 dBA at 1 m
    Operating temperature 0 ÷ 40 °C
    Relative humidity <95% no condensing
    DATA
    Weight 94 Kg
    Dimensions (h w d) 2x(455x175x660)/2×175(4U)x483x660 mm

    SDL 10000

    Models SDL 10000
    INPUT
    Rated power 10000 VA
    Voltage 220-230-240 Vac
    Frequency 50/60 Hz ± 5 Hz
    Power factor >0.98
    Current distorsion ≤5%
    BY PASS
    Voltage tolerance 180÷264 Vac (selectable in Economy Mode and SMART ACTIVE Mode)
    Frequency tolerance Selected frequency ± 5% (user configurable)
    OUTPUT and INVERTER OUTPUT
    Rated power 10000 VA
    Active power 9000 W
    Number phases 1
    Crest factor (Ipeak/Irms) 3 : 1
    Waveform Sinewave
    Frequency 50/60 Hz selectable
    Voltage distortion with distorcing load <5%
    Voltage distortion with linear load <3%
    OVERLOAD TIMES
    100% < Load < 110% 1 min
    Load > 150% 0.5 s
    BATTERIES
    Typical recharge time 2÷4 h
    ENVIRONMENTAL
    Color Dark grey
    Safety compliance EN 62040-1 and Directive 73/23 EEC, 93/68 EEC
    EMC conformance EN 62040-2 cl. B and Directive 89/336/EEC, EN 62040-3 (capabilities)
    Accessories provided 2 output supply cables 10 A; 1 plug IEC-16 A; software; serial cable; tools for mimic panel
    Protection rating 3
    Protections Overload – short-circuit – overvoltage – undervoltage – temperature – low battery
    Line-Interactive/Smart Active efficiency 98%
    Noise <45 dBA at 1 m
    Operating temperature 0 ÷ 40 °C
    Relative humidity <95% no condensing
    DATA
    Weight 95 Kg
    Dimensions (h w d) 2x(455x175x660)/2×175(4U)x483x660 mm

    SDL 6500 TM

    Models SDL 6500 TM
    INPUT
    Rated power 6500 VA
    Voltage 380-400-415 Vac
    Frequency 50/60 Hz ± 5 Hz
    Power factor >0.98
    Current distorsion ≤5%
    BY PASS
    Voltage tolerance 180÷264 Vac (selectable in Economy Mode and SMART ACTIVE Mode)
    Frequency tolerance Selected frequency ± 5% (user configurable)
    OUTPUT and INVERTER OUTPUT
    Rated power 6500 VA
    Active power 5850 W
    Number phases 1
    Crest factor (Ipeak/Irms) 3 : 1
    Waveform Sinewave
    Frequency 50/60 Hz selectable
    Voltage distortion with distorcing load <5%
    Voltage distortion with linear load <3%
    OVERLOAD TIMES
    100% < Load < 110% 1 min
    Load > 150% 0.5 s
    BATTERIES
    Typical recharge time 2÷4 h
    ENVIRONMENTAL
    Color Dark grey
    Safety compliance EN 62040-1 and Directive 73/23 EEC, 93/68 EEC
    EMC conformance EN 62040-2 cl. B and Directive 89/336/EEC, EN 62040-3 (capabilities)
    Accessories provided 2 output supply cables 10 A; 1 plug IEC-16 A; software; serial cable; tools for mimic panel
    Protection rating 3
    Protections Overload – short-circuit – overvoltage – undervoltage – temperature – low battery
    Line-Interactive/Smart Active efficiency 98%
    Noise <45 dBA at 1 m
    Operating temperature 0 ÷ 40 °C
    Relative humidity <95% no condensing
    DATA
    Weight 93 Kg
    Dimensions (h w d) 2x(455x175x660)/2×175(4U)x483x660 mm

    SDL 8000 TM

    Models SDL 8000 TM
    INPUT
    Rated power 8000 VA
    Voltage 380-400-415 Vac
    Frequency 50/60 Hz ± 5 Hz
    Power factor >0.98
    Current distorsion ≤5%
    BY PASS
    Voltage tolerance 180÷264 Vac (selectable in Economy Mode and SMART ACTIVE Mode)
    Frequency tolerance Selected frequency ± 5% (user configurable)
    OUTPUT and INVERTER OUTPUT
    Rated power 8000 VA
    Active power 7200 W
    Number phases 1
    Crest factor (Ipeak/Irms) 3 : 1
    Waveform Sinewave
    Frequency 50/60 Hz selectable
    Voltage distortion with distorcing load <5%
    Voltage distortion with linear load <3%
    OVERLOAD TIMES
    100% < Load < 110% 1 min
    Load > 150% 0.5 s
    BATTERIES
    Typical recharge time 2÷4 h
    ENVIRONMENTAL
    Color Dark grey
    Safety compliance EN 62040-1 and Directive 73/23 EEC, 93/68 EEC
    EMC conformance EN 62040-2 cl. B and Directive 89/336/EEC, EN 62040-3 (capabilities)
    Accessories provided 2 output supply cables 10 A; 1 plug IEC-16 A; software; serial cable; tools for mimic panel
    Protection rating 3
    Protections Overload – short-circuit – overvoltage – undervoltage – temperature – low battery
    Line-Interactive/Smart Active efficiency 98%
    Noise <45 dBA at 1 m
    Operating temperature 0 ÷ 40 °C
    Relative humidity <95% no condensing
    DATA
    Weight 94 Kg
    Dimensions (h w d) 2x(455x175x660)/2×175(4U)x483x660 mm

    SDL 10000 TM

    Models SDL 10000 TM
    INPUT
    Rated power 10000 VA
    Voltage 380-400-415 Vac
    Frequency 50/60 Hz ± 5 Hz
    Power factor >0.98
    Current distorsion ≤5%
    BY PASS
    Voltage tolerance 180÷264 Vac (selectable in Economy Mode and SMART ACTIVE Mode)
    Frequency tolerance Selected frequency ± 5% (user configurable)
    OUTPUT and INVERTER OUTPUT
    Rated power 10000 VA
    Active power 9000 W
    Number phases 1
    Crest factor (Ipeak/Irms) 3 : 1
    Waveform Sinewave
    Frequency 50/60 Hz selectable
    Voltage distortion with distorcing load <5%
    Voltage distortion with linear load <3%
    OVERLOAD TIMES
    100% < Load < 110% 1 min
    Load > 150% 0.5 s
    BATTERIES
    Typical recharge time 2÷4 h
    ENVIRONMENTAL
    Color Dark grey
    Safety compliance EN 62040-1 and Directive 73/23 EEC, 93/68 EEC
    EMC conformance EN 62040-2 cl. B and Directive 89/336/EEC, EN 62040-3 (capabilities)
    Accessories provided 2 output supply cables 10 A; 1 plug IEC-16 A; software; serial cable; tools for mimic panel
    Protection rating 3
    Protections Overload – short-circuit – overvoltage – undervoltage – temperature – low battery
    Line-Interactive/Smart Active efficiency 98%
    Noise <45 dBA at 1 m
    Operating temperature 0 ÷ 40 °C
    Relative humidity <95% no condensing
    DATA
    Weight 95 Kg
    Dimensions (h w d) 2x(455x175x660)/2×175(4U)x483x660 mm

    Offerte aanvragen